Ensuring safe passage for a steel coil cargo
Often cargo planners who are preparing the stowage of steel coils in the cargo hold of a general dry cargo ship or bulk carrier, do not have the necessary cargo type specific information required to help them decide the permissible cargo load, thus preventing damage to the ship’s structure.
As Jan Rüde, Ship Type Expert MPV, DNV GL explains, according to SOLAS Chapter VI, Reg. 5, every ship must have an approved cargo securing manual.
Nonetheless, the majority of these manuals do not include detailed information about the carriage of steel coils or the only contain only particular types of steel coil.
This fact leaves it upon the loading planner to determine the loading limits, and some planners simply divide the coil weight by the coil surface area and compare the resulting pressure acting upon the tank top with the allowable uniform tank top load (t/m²).
This approach fails to account for the true forces acting upon the ship’s structure when carrying steel coils. The result could be a deformed inner bottom and floor buckling.
Steel coil loads are not uniform Regarding steel coils, they are
loaded with their axis pointed in the ship’s longitudinal direction.
They are located on wooden dunnage arranged in transverse direction. This dunnage creates a protective layer between the coils and the inner bottom plating.
The weight of the steel coils is then transferred by the dunnage onto the bottom structure of the vessel, which incorporates the inner bottom plating, the longitudinal elements, the double bottom girders and the hull girder structure.
Moreover, the force of this weight is not distributed correctly across the tank top.
Instead it acts upon the inner bottom structure of the vessel as concentrated, short line loads.
This leads to the fact that the permissible uniform distributed load information in t/m² as provided in the cargo securing manual cannot
CARGO
be used as a basis for concluding in the maximum load when carrying steel coils, Mr. Rüde adds.
STRENGTH INFORMATION FOR CARGO PLANNERS
Steel coils come in many sizes and weights, and can be arranged in various ways regarding the placement of the locking coil, the number of tiers, and the dunnage.
The cargo planner has to have reliable information to decide fast if a certain type of steel coil can be transported by the vessel.
If this is possible, then the planner must figure out how the cargo should be stowed to ensure safe carriage.
For this reason, the planner should set out the maximum cargo capacity and the minimum requirements for safe stowage without overestimating the necessary number of dunnage elements.
ENHANCING CAPACITY
When a ship is moving, its vertical acceleration varies along the length of the cargo hold. Thus, the position of coils in the individual holds of a vessel must be accounted for when calculating loading tables, Jan Rüde concluded.
The Report • June 2019 • Issue 88 | 55
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
