RSM Lining Supplies Unveils First CP308 Tested Resin in 17 Years— And Pioneers the First CP655 Tested Resin Ever!
We are proud to announce the introduction of the first CP308 tested resin to the UK Cured In Place Pipe (CIPP) market in over 17 years, and one of the first CP655 tested resins in existence!
We are proud to announce the introduction of the first CP308 tested resin to the UK Cured In Place Pipe (CIPP) market in over 17 years, and one of the first CP655 tested resins in existence!
Responding to increasing industry demand, we have developed two innovative resins that not only meet but exceed the rigorous requirements of the CP308 and new CP655 infiltration tests —offering contractors reliable, long pot-life products designed to reduce water infiltration in sewerage systems. This marks a significant milestone, as our Hot Cure Epoxy resin is one of the first resins to successfully pass the CP655 test.
Both the CP308 and CP655 test were designed to address evolving challenges in the
Responding to increasing industry demand, we have developed two innovative resins that not only meet but exceed the rigorous requirements of the CP308 and new CP655 infiltration tests —offering contractors reliable, long pot-life products designed to reduce water infiltration in sewerage systems. This marks a significant milestone, as our Hot Cure Epoxy resin is one of the first resins to successfully pass the CP655 test.
Both the CP308 and CP655 test were designed to address evolving challenges in the
sewer rehabilitation industry. They evaluate the effectiveness of CIPP lining systems in resisting water infiltration, ensuring they can seal both wide and narrow circumferential gaps. Our Warm Cure and Hot Cure Epoxy resins have been rigorously tested and passed under challenging conditions, including bonding directly to wet pipes without the need for additional sealing mechanisms, and providing a fully leak-tight finish even in complex installations involving lateral reinstatements.
sewer rehabilitation industry. They evaluate the effectiveness of CIPP lining systems in resisting water infiltration, ensuring they can seal both wide and narrow circumferential gaps. Our Warm Cure and Hot Cure Epoxy resins have been rigorously tested and passed under challenging conditions, including bonding directly to wet pipes without the need for additional sealing mechanisms, and providing a fully leak-tight finish even in complex installations involving lateral reinstatements.
During our Open Day in September 2023, Phil Steele, our Sales Director, reiterated our commitment to addressing the industry’s challenges. Our Warm Cure Epoxy passed the CP308 test in January 2024, marking the first such achievement since 2007, whilst the Hot Cure Epoxy
RSM Lining Supplies Unveils First CP308 Tested Resin in 17 Years— And Pioneers the First CP655 Tested Resin Ever!
was one of the first resins to pass the CP655 test in September 2024.
was one of the first resins to pass the CP655 test in September 2024.
Led by our Product Development Manager, Simon Bull, our technical team meticulously conducted CP308 testing at our headquarters and CP655 testing at the WRc test centre. This process required the resins to demonstrate resilience by bonding to wet pipes and successfully sealing multiple pipe connections, proving their effectiveness across various installation scenarios.
During our Open Day in September 2023, Phil Steele, our Sales Director, reiterated our commitment to addressing the industry’s challenges. Our Warm Cure Epoxy passed the CP308 test in January 2024, marking the first such achievement since 2007, whilst the Hot Cure Epoxy
With previous CP308 tested systems no longer widely available, the launch of our CP308 & CP655 tested resins arrives at a critical time for the industry. High levels of water infiltration in sewerage systems continue to strain pumping stations, increasing energy
Led by our Product Development Manager, Simon Bull, our technical team meticulously conducted CP308 testing at our headquarters and CP655 testing at the WRc test centre. This process required the resins to demonstrate resilience by bonding to wet pipes and successfully sealing multiple pipe connections, proving their effectiveness across various installation scenarios.
With previous CP308 tested systems no longer widely available, the launch of our CP308 & CP655 tested resins arrives at a critical time for the industry. High levels of water infiltration in sewerage systems continue to strain pumping stations, increasing energy
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86
