46


PROJECT REPORT: SPORTS & LEISURE FACILITIES


Managing the Risk of Legionella during an energy crisis


H ot water is the primary method


of controlling Legionella bacteria in water distribution systems in public buildings such as swimming pools and leisure centres. The recent energy crisis has placed extraordinary pressures on budgets and economising on heating and hot water production may seem like an obvious way to reduce the energy bills. However, reducing the temperature is a false economy and places the public at risk. Carole Armstrong, marketing manager at DELABIE looks at how to keep public washrooms safe for users.


Contamination risk Naturally


present in water, Legionella


bacteria develop in standing water with a source of nutrients, such as biofi lm in pipes or corroded water storage tanks. They multiply at 20-45°C and are harmful if inhaled in aerosol form i.e., steam from showers. Hot water is the typical method for controlling Legionella bacteria in non- domestic


buildings. Health and Safety


Guidance recommends producing and storing water above 60°C, and distributing it at 50°C. At these temperatures, 90% of the bacteria die within 2 minutes. If the temperature falls below this guideline, the risk of bacterial growth increases. Maintaining these minimum water temperatures reduces the risk of contamination and is more energy effi cient than allowing water to cool during periods of inactivity then reheating. Simple measures to help prevent heat loss


and, therefore, bacterial development include keeping pipe runs to a minimum (ideally <2 metres); lagging pipes to prevent heat loss; and, where cold and hot water pipes run side by side, insulating cold water pipes to avoid heat transfer and maintain the cold water temperature below 20°C where legionella bacteria are no longer dormant.


Technical solutions against Legionella In sports facilities, thermostatic mixing valves (TMVs) are typically used to blend incoming hot water to deliver mixed water at a safe temperature for showering. Type 3 TMVs feature a failsafe which shuts off the hot water if the cold water supply fails (and vice versa). In normal circumstances, the failsafe requires a minimum temperature differential between the incoming water supplies to ensure user


SPORTING 2 electronic shower with integral TMV prevents scalding and cold water deadlegs


safety. If this differential is not maintained, the failsafe won’t operate, putting users at risk of scalding or cold showers. With centralised TMVs there is also a risk of bacterial development. Since the hot water is pre-blended, there is no draw off from the cold supply, creating a deadleg with stagnant water. Installing showers with a point-of-use TMV avoids any upstream deadlegs, drawing from both hot and cold supplies when in use. DELABIE’s thermostatic,


electronic


SPORTING 2 shower panel offers the perfect solution. When not in use, an automatic fl ush activates every 24 hours after the last use, running for 60 seconds and refreshing the water in the pipework and the mechanism. It is also touch-free, preventing the spread of germs by hand.


Water effi cient solutions


The electronic Sporting 2 shower panel also optimises water usage. The valve closes automatically when hands are removed from the detection zone and a pre-set fl ow rate of 6 litres per minute prevents unnecessary waste. The user can therefore pre-rinse, apply the soap or shampoo, and rinse without the


ADF09_Delabie_Project Report - Sports & Leisure_Full Page Advertorial.indd 2 WWW.ARCHITECTSDATAFILE.CO.UK


water running continuously. With a DELABIE electronic


shower, water consumption is


signifi cantly reduced – and reducing water consumption reduces the amount of energy required to heat it.


Reducing energy costs can be achieved


without compromising user safety. Legionella prevention measures must be maintained, but by reducing unnecessary water consumption,


both


water and energy bills can be managed in public places. By understanding the risks and installing products specifi cally designed to meet these challenges, the risk of contamination and scalding can be managed without blowing the budget.


01491 824449 www.delabie.co.uk


04/08/2023 09:17 ADF SEPTEMBER 2023


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100