APPOINTMENTS & COMPANY NEWS 31
NEWS FEATURE
Decoupling mats are an important element of successful background preparation
A
successful commercial tiling job starts long before the fi rst tile is laid. Careful assessment and preparation of the background, including the selection of a suitable decoupling
mat (if required), is essential to create the foundations for a durable installation. For contractors, time spent getting the background right is not an optional extra – it is fundamental to delivering a successful project. All decoupling mats are designed for lateral movement, not vertical. If defl ection is present in a substrate, this will require suffi cient bracing to ensure the fl oor can withstand the weightloading of the tiled fl oor, especially in high traffi c or load bearing areas. While attention tends to be focused on tile selection, adhesives, grout and workmanship, background preparation is just as important, and decoupling mats have an important job to play in achieving a reliable, long-lasting tiled fi nish.
This is especially true in commercial buildings, which can present particularly demanding conditions. Floors may be subject to heavy foot traffi c, wheeled loads, vibration, movement and fl uctuations in temperature and humidity. At the same time, substrates such as concrete, screeds, timber and existing fl oors can experience movement or shrinkage. This is particularly true in the case of fl oors where under- fl oor heating has been installed. If these stresses are transferred directly into the tiled surface, cracking, debonding or grout failure can result. A decoupling mat, such as PALACE EASI-MAT, is designed to help manage lateral movement by creating a separation layer between the substrate and the tiled fi nish, providing an isolating and protective layer to facilitate fl oor tiling. Stresses in the substrate are not transferred directly to the tiles.
For a tiling contractor working in a commercial environment, installing a decoupling mat will offer an important additional level of protection, complementing, but not taking the place of, other aspects of good surface preparation. Any substrate still needs to be structurally sound, suitably clean and appropriately prepared for the system being installed. Levels, moisture content, surface contamination, cracks and existing movement all need to be assessed before work begins. Correct specifi cation is equally important. Not every mat is suitable for every substrate or application, as the requirements of a busy commercial environment will probably be considerably greater than those of a domestic installation. The different types are decoupling/ uncoupling mats, anti-fracture mats and underfl oor heating carrier mats. All types are designed to provide a cushion between the sub- fl oor and the tiles. With regard to specifi cation, the best advice, as always, is to follow manufacturer’s guidance.
Supplied by Nick Bratt, national technical sales manager for Palace Chemicals.
ADF SEPTEMBER 2026
WWW.ARCHITECTSDATAFILE.CO.UK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78
