SYSTEM FEATURES
The iNOEX iXRAY is equipped with exceptional safety
features and adheres to high safety
standards. Compliance with all national and international standards.
Foldable radiation protection tubes
The radiation protection tube can be opened on both sides for easier threading of the product. The safety switch in connection with the safety PLC switches off the radiation when open.
Hermetic sealing
Hermetic U-shaped seal separating the product and measuring area. This prevents dirt or dust from getting to the actual measuring technology. Easy cleaning is ensured by opening the foldable radiation protection tubes and blowing out the product passage.
Narrow X-ray beam
The adjustable aperture gap leads to a narrow X-ray beam. The narrow beam lowers the radiated tube volume, which correlates with the released scattered radiation. Thus, the scattered radiation is reduced to a minimum.
Pipe support
Optimal pipe support is provided by double guide rollers with manually adjustable spacing. Pipe guidance through the center of the measuring chamber minimizes pipe movement and increases measurement quality. There is also an integrated
safety mechanism for unexpected thick spots on the pipe.
Enclosure Cooling Unit The enclosure cooling unit is optional and available in two versions (240 V or 115 V). The temperature is set from a small control panel. In addition, the measurement chamber cooling circuit
is
hermetically sealed to prevent contamination of the measurement components.
Foldable radiation protection tube
Pipe support
Our technology helps to improve the quality and efficiency of production.
USER-FRIENDLY AND SAFE SYSTEM
The iXRAY series is user-friendly. The line operator only has to select the pipe, hose or cable recipe to start the measurement. Product specifi c recipes can be implemented by the customer or technical recipes are created by iNOEX for customer specifi c use-cases. Furthermore, the X-ray units do not present any hazard to the operator. The radiation output is far below the permitted legal limits and other safety aspects ensure safe use.
Thanks to the intuitive and easy-to-use interface, the line operator always has an overview of the most important production parameters, the wall thickness distribution over the circumference and the display of the eccentricity. This enables quick intervention in the production process at any time. Process automation can be achieved by combining the system with gravimetric solutions from iNOEX.
INSPIRE BEYOND MEASUREMENT
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50
