Page 76
www.us-tech.com
CHINO, CA — Scienscope is ex- hibiting component counting, traceability, inspection and dry storage systems at SMTA International 2026. The equip- ment supports material control from incoming reels through pro- duction and storage. The AXC-800 III X-ray com-
Scienscope Links Counting and Traceability
ation and MES connectivity help transfer count results into inven- tory records. The IMS-100 incom- ing material system adds barcode- based reel identification and track- ing to support traceability. For inspection, the Xspection
ponent counter uses AI-assisted image analysis to count compo- nents without unwinding reels. The company specifies counting accuracy up to 99.9%. Label gener-
1860 combines a closed X-ray tube with tilting capability to examine solder joints and other features that are difficult to view directly. Scienscope’s dry cabinets main- tain relative humidity from 1 to 10% for moisture-sensitive mate-
rials. Their self-regenerating dry- ing system operates without nitro- gen, providing controlled storage alongside the company’s material management and inspection
equipment. Contact: Scienscope
International, 5751 Schaefer
Avenue, Chino, CA 91710 % 909-590-7273 E-mail:
info@scienscope.com Web:
www.scienscope.com
See at SMTAI, Booth 2718
October 2026
X-ray component counting and material management equipment.
Teledyne Camera Delivers Onboard 3D Processing
CHESTNUT RIDGE, NY — Teledyne e2v’s Perciva ToF in- dustrial camera combines depth sensing with onboard processing for logistics, robotics, inspection and surveillance. The camera uses the Hydra3D+ CMOS sen- sor with 832 x 600-pixel resolu- tion and a 10-micron, three-tap pixel architecture. HiRho technology improves
near-infrared sensitivity, sup- porting longer operating dis- tances and detection of low-re- flectivity materials. The sensor architecture is
designed to capture moving ob- jects without motion artifacts, while the camera handles chang- ing outdoor illumination and in- terference from other systems without requiring interconnec- tions between cameras. Factory calibration and em-
bedded processing provide depth maps and point-cloud data di- rectly through a GigE interface. This reduces the integration work needed to add 3D measure- ments to an industrial system. Documentation and samples
are available for developers eval- uating the camera for depth
measurement applications. Contact: Teledyne e2v US,
700 Chestnut Ridge Road,
Chestnut Ridge, NY 10977 % 845-425-2000 E-mail:
jessica.broom@
teledyne.com Web:
www.teledynevisionsolu-
tions.com
See at electronica, Hall A2 Booth 157/2
See at MD&M Midwest, Booth 3210
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92