Page 52
www.us-tech.com
October 2026
Beyond Pass or Fail: Lessons from
100 Advanced SPI and Print Process Engagements
By Brent Fischthal, Head of Global Marketing Communications, Koh Young Technology, and Ray Welch, Sr. Applications Engineer, Koh Young America
process.” It usually gets their attention, but there is an important point behind it. As Welch explains, solder paste inspection can show manufacturers much more than whether an individual deposit passes or fails. A close look at the measurement data can re- veal variation, trends, programming issues, and upstream process conditions that may otherwise remain hidden. In many cases, the measurements can reveal something about the print process long before that condition be- comes an obvious production problem. Welch recently completed his
T
100th three-day SPI Level 2 Print Process engagement. Reaching that milestone caused him to think less about the number and more about what he has learned from the process engi- neers, technicians, operators, and man- ufacturing teams he has worked with. Since joining Koh Young America
in 2016, after working with OnCore/NEO Tech and its Corporate Process Engineering team, Welch has visited established and new customers to help them improve how they imple- ment and use SPI. Those engagements have now taken him to more than 100 customer sites across the United States, Mexico, Canada, and Thailand, along with training at the Koh Young America headquarters in Atlanta, Georgia. After that many engagements, certain
patterns become difficult to miss. Welch finds that most manufacturers know how to operate their SPI equipment. The opportuni- ty he frequently sees is in understanding what the measurement data actually says about the printing process. That distinction matters because SPI should do more than tell
Hands-on SPI training connects measurement data with print-process conditions on the factory floor.
through experience. Documentation may not keep pace with changes in equipment or re- sponsibilities. The challenge comes when something
that works becomes accepted without every- one understanding why it works. A setting, tolerance, or response to a particular SPI re- sult can eventually become part of the nor- mal process because that is how it has al- ways been done. This is why the three-day engagement is
intentionally split between classroom instruc- tion and hands-on work on the factory floor. Roughly half the time is spent reviewing SPI
here is a phrase Ray Welch frequently shares with engineers and technicians: “SPI reveals the sins of the print
manufacturers whether a deposit passes or fails. It measures the output of one of the most important processes on the line.
Knowing the Process One recurring lesson is how easily
knowledge gaps develop. People change posi- tions. Experienced employees retire or leave. A new engineer learns from the engineer be- fore them. Operators develop techniques
concepts, data analysis, programming, process characterization, and print-process fundamen- tals. The other half applies those ideas to the customer’s actual equipment, assemblies, and current production issues.
Beyond Go-No Go One of the clearest opportunities Welch
sees is moving SPI beyond its use as a simple “Go-No Go” inspection system. Defect infor- mation is important, but focusing only on defect calls and yields leaves a great deal of useful information un- touched.
The goal is not simply to find
defects. It is to understand the process well enough to prevent them.
SPI generates parametric meas-
urement data that can provide insight into the health and capability of the print process. Instead of asking only whether a deposit is acceptable, manu- facturers can examine how volume, area, height, position, and other meas- urements behave across the board and over time.
Consider a process that is still producing
deposits within specification while average vol- ume begins to shift. A pass/fail view may sug- gest that nothing is wrong. Parametric data may tell a different story: the process is mov- ing, creating an opportunity to investigate be- fore it creates defects. Welch makes extensive use of Koh
Young’s SPC Plus tools during these engage- ments to analyze actual SPI data and charac- terize print performance. The goal is not sim- ply to find more defects. It is to understand process capability, variation, and trends well enough to make better decisions.
Continued on next page
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92