Page 56
www.us-tech.com
October 2026
Flying Probe Testing Meets Semiconductor Precision
By Barbara Duvall, Marketing Director, Seica
vices that cannot meet specifications. Wafer testing supports this effort by checking indi- vidual circuits and recording their locations and results in a digital map. Automatic test equipment (ATE) makes electrical contact through a probe card, evaluating analog, digital, and mixed signals before devices move to subsequent production stages. The reliability of that interface is es-
F
sential. Probe cards combine high-density interconnections with delicate contact structures, creating demanding require- ments for the equipment used to test them. Flying probe systems must provide precise contact, comprehensive electrical measurements, and enough mechanical flexibility to accommodate both microscop- ic features and large assemblies.
Testing the Test Interface Probe card validation begins before fi-
nal assembly. Bare board testing checks continuity and isolation on individual mul- tilayer organic (MLO) substrates and printed circuit boards, including the electrical paths that will connect the two. After components
Pilot VX ULTRA flying probe test system.
the interconnected junctions between the MLO and PCB interface. Each stage address- es a different opportunity for faults to enter
See at SMTAI, Booth 2401
inding defective dies before packaging and assembly helps semiconductor manufacturers avoid adding cost to de-
are mounted, in-circuit and functional tests verify assembly quality and powered opera- tion.
The combined PCB and MLO then re-
quire full assembly validation. A final in- tegrity connection certification test checks
the finished probe card. Traditional fixture-based testing can in-
volve lengthy lead times and substantial cus- tomization costs. Flying probe systems pro- vide flexibility for changing designs and test requirements, particularly during engineer- ing validation, prototyping, and low-vol- ume production. Rapid setup and software that simplifies program development help keep testing practical as probe card com- plexity increases. Electrical coverage must extend well
beyond detecting opens and shorts. A com- plete test strategy may require capaci- tance measurements, Kelvin resistance
Probe card testing must
accommodate microscopic contact features and assemblies that can weigh tens of kilograms.
measurements, high-voltage isolation, low-current leakage measurements, para- metric testing of passive and active compo-
nents, and powered functional tests. Probe cards can contain tens of thou-
sands of nets, with contact points on both sides. Double-sided probing and software ca-
Continued on next page
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92