Page 72
www.us-tech.com
BTU Reflow Handles Heavy Boards
WESTFORD, MA — BTU Inter - national is exhibiting Aurora re- flow technology at SMTA Inter - national 2026, including systems designed for the large, heavy PCB assemblies used in AI computing and data centers. The Aurora
conveyor mechanisms manage board movement through the vac- uum process. The platform accommodates
a 620 x 711 mm vacuum chamber, with an optional dual-lane config- uration for production flexibility.
AI-Assisted Inspection TRI Connects
SAN JOSE, CA — Test Research, Inc. is exhibiting its inspection portfolio at SMTA International 2026, including the TR7500QE Plus 3D automated optical in- spection system and TR7007Q SII 3D solder paste inspection system. The equipment combines
automated X-ray inspection for hidden connections. AI tools assist with program
setup and component recogni- tion, reducing the manual work required to introduce products. Support for IPC-CFX, IPC- DPMX and the Hermes standard
October 2026
Aurora reflow system for demanding PCB assemblies.
200N combines heating capacity, thermal zone control and heavy- duty conveyor rails to support de- manding reflow profiles. The Aurora Vacuum plat-
form adds vacuum processing to reduce solder joint voiding. A soft- start sequence limits component movement as the chamber enters its vacuum cycle, while chamber heating helps maintain the as- sembly’s thermal profile. Three
The equipment is intended to help manufacturers manage the combi- nation of board mass, package complexity and solder joint quali- ty requirements associated with
high-performance electronics. Contact: BTU International,
10 Lyberty Way, Suite 100,
Westford, MA 01886 % 978-667-4111 E-mail:
sales@btu.com Web:
www.btu.com
See at SMTAI, Booth 2729 Lightning Quick
AI-assisted inspection systems.
measurement technology with AI-assisted programming and defect analysis. The TR7500QE Plus uses
multiple cameras to inspect com- ponent and solder joint features from different perspectives. The TR7007Q SII measures solder paste deposits before component placement and can identify printing problems. The compa- ny’s portfolio also includes 3D
allows inspection equipment to exchange information with other production systems. Connected inspection data supports trace- ability, process analysis and
feedback across the line. Contact: Test Research
USA, 832 Jury Court, Suite 4,
San Jose, CA 95112 % 408-567-9898 E-mail:
triusa@tri.com.tw Web:
www.tri.com.tw
See at SMTAI, Booth 2636, and electronica, Hall A4 Booth 638 Inspection into Control
DULUTH, GA — Koh Young is exhibiting True3D inspection and Smart AI Solutions at SMTA International 2026. The Zenith 2 UHS automated optical inspec- tion system measures compo- nents and solder joints in 3D, providing quantitative data for inspection despite variations in board color, component appear- ance and substrate conditions. The Neptune C+ uses laser
INTRUDER SPLIT VISION
Top & Bottom Heat 3-minute oven reflow Lowest-cost USA-made split-vision placement Includes installation & training Complete BGA rework station with computer – under $25K
Find out more! Visit
www.APE.com today.
APE.com
800.822.8646
Sales@APE.com Key Largo, Florida
interferometry for non-destruc- tive 3D measurement of trans- parent and translucent coatings and dispensed materials. It measures coverage, thickness and consistency while detecting defects such as bubbles, cracks and insufficient or excessive ma- terial. Applications include con- formal coating, underfill, epoxy, adhesive, potting and flux in- spection. KSMART connects inspec-
tion and production data for process analysis, while KAP and Smart Review apply AI to pro- gramming and defect review. Koh Young Process Optimizer extends inspection feedback to production equipment: KPO Printer analyzes solder paste in- spection data to optimize print-
ing parameters, and KPO Mounter uses inspection data to
Koh Young Turns
Zenith 2 UHS 3D automated optical inspection system.
identify placement trends and help correct process deviations. The measurement data also
supports more consistent inspec- tion across operators, products and production lines, helping re- duce false calls and missed de- fects. AI-assisted programming and review reduce manual inter- vention, while feedback to print- ers and placement equipment helps manufacturers respond to
process variation. Contact: Koh Young
America, Inc., 1950 Evergreen Boulevard, Suite 200, Duluth, GA 30096 % 470-374-9254 E-mail:
america@kohyoung.com Web:
www.kohyoungamerica.com
See at SMTAI, Booth 2823, and electronica, Hall C2 Booth 329
AS LOW AS $20K! SYSTEMS BGA
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92