October 2026
www.us-tech.com
Rehm Pairs Precision Dispensing with UV LED Curing
BLAUBEUREN-SEISSEN, GERMANY — Rehm Thermal Systems offers the Protec- toXC dispensing platform and RDS UV LED curing system for adhesive bonding, potting, and coating applications in electronics manu- facturing. The compact ProtectoXC processes adhe-
sives and potting compounds for applications including glob top, dam and fill, flip-chip un- derfill, and selective material application. Flexible system configurations accommodate different materials and dispensing methods. Automatic needle measurement checks
application tools and enables corrections where needed. Heated nozzles help maintain consistent materi- al temperatures and dispensing conditions. ViCON Protecto soft- ware provides a touch interface for programming and adapting processes to different assemblies. The RDS UV LED cures UV-
reactive adhesives, potting com- pounds, and coatings using sta-
YINCAE Introduces Dual-Cure Optical Underfill
MENANDS, NY — YINCAE Ad- vanced Materials has introduced UF 66UV, a UV and thermal dual-cure underfill for optoelec- tronic, photonic, and semicon- ductor packaging. The material combines room-temperature flow with rapid UV fixation and low- temperature thermal curing. The underfill flows into fine
gaps without preheating, sup- porting assembly of delicate opti- cal components. UV exposure im- mobilizes the accessible material after dispensing. A subsequent thermal cure at 60°C completes polymerization in shadowed areas. According to the company,
the cured material provides greater than 98% visible-light transmittance. Reliability evalu- ations following pressure cooker testing and five lead-free reflow cycles at 260°C showed no meas- urable reduction in optical trans- mission, no visible yellowing, and maintained adhesion and encapsulation integrity. Applications include mi-
croLED displays, CMOS image sensors, optical sensors, silicon photonics, VCSEL and LiDAR modules, augmented- and virtual- reality optical assemblies, and medical and industrial optical de- vices.
Contact: YINCAE Advanced
Materials, LLC, 93 Broadway, Menands, NY 12204 % 518-452- 2880 E-mail:
info@yincae.com Web:
www.yincae.com
JET-ON-THE-FLY SOLDER PASTE JETTING Dispensing and UV LED curing line.
tionary, full-area exposure. Four independ- ently controlled LED segments allow opera- tors to adjust illumination to the product and
process. The LEDs require no warm-up time, and exposure can take only a few seconds, de- pending on the application. Compared with conventional UV lamps,
LED technology reduces energy consumption and thermal stress on temperature-sensitive components. The system supports materials formulated for LED curing as well as other
compatible UV-reactive materials. Contact: Rehm Thermal Systems
GmbH, Leinenstrasse 7, 89143 Blaubeuren- Seissen, Germany % +49-7344-9606-0 E-mail:
info@rehm-group.com Web:
www.rehm-group.com
Page 31
TRUE VERSATILITY FOR YOUR HIGH-MIX PRODUCTION
COMPLEMENT YOUR STENCIL PRINTER
For Complex and Selective Applications
REPLACE YOUR STENCIL PRINTER
For a Fully Digital, Stencil-Free Process
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92