TRAINING & CPD THE PRESSURES ON
The Water Jetting Association is about to launch a new code of practice for pressure washing, an essential cleaning process in many environments. President John Jones explains why it’s urgently needed.
An experienced operative uses a steam pressure washer to clear a frozen roadside culvert. As he pulls the hose from the pipe he loses control of it and the water jet cut through his boot, filling it with 1100°C water at 3,000 psi, travelling at over 300mph.
This real incident lasted less than three seconds. But the operative suffered 4th degree burns. Skin and tissue was torn from the bone. After emergency surgery, he needed many other operations as continuing efforts were made to rebuild his foot.
“People who operate pressure washers at home in shorts and flip flops to clean cars and drives do not appreciate the risks they are taking when pressures can reach 2,500 psi (170 bar).”
Code of practice The incident represents just one of many. In another, a dockyard operative slipped due to the unexpected power of a water jet, allowing the nozzle to swipe across his supervisor, lacerating his upper thigh.
A big problem is that pressure washing has become so commonplace. People who operate pressure washers at home in shorts and flip flops to clean cars and drives do not appreciate the risks they are taking when pressures can reach 2,500 psi (170 bar).
The Water Jetting Association (WJA) is taking steps to address this. We are creating a new pressure washing code of practice. It lays out, in plain terms, steps that need to be taken to optimise the safe use of low-pressure water jetting equipment.
Urgent need We believe there is an urgent need to set clear standards for pressure washing, not least because it has become essential thanks to rapid technical advances and proliferation of its use.
Pressure washing is used to clean vehicles, remove graffiti, blast chewing gum from town centre pedestrian
60 | TOMORROW’S FM
areas and airport concourses, and clean mud from roads. All tasks too costly to be carried out by other means.
However, without a clear operational framework that a code of practice provides, there is opportunity for operatives to improvise and develop unsafe and suboptimal practices.
Safety and productivity The WJA is the UK’s trade body for the water jetting industry. Our focus, since we were established in 1980, has been on promoting the safe use of high pressure and ultra-high pressure water jetting, with water pressures ranging up to 40,000 psi (2,750 bar).
We have two codes of practice for systems operating at these pressures – the Blue Code for high pressure and ultra-high pressure water jetting, and the Red Code for water jetting used for drain and sewer cleaning.
The new pressure washing code will now support safe and productive water jetting at lower pressures.
Pressure washing training The code of practice has sections on site and equipment set-up, and the different types of pressure washing pumps and equipment. This includes hot water systems which, as we have seen, introduce additional risks.
Also covered is equipment operation, managing the pressure washing team, and equipment checks and maintenance. There is detailed advice on risk assessment and a pre-start checklist, as well.
A key element is effective training. The WJA is the UK’s main provider of water jetting training. This includes a City & Guilds accredited pressure washing course delivered by WJA-approved training providers and instructors. Lasting at least five hours, it is designed to teach class-based and practical skills for safe and productive pressure washing.
Vital role of PPE Use of PPE is a key section in the new code. Those flip flops and Bermuda shorts just won’t cut it. Essential items include waterproof and slip-resistant gloves and waterproof suits.
Operatives should wear steel toecap rubber safety boots that meet EN 345 or EN ISO 20345. Ear protection should be provided where sound levels exceed 80 decibels.
A full-face visor – preferably EN166 class A – is essential. This may needed to be augmented with gas and fine dust resistant googles to EN166 class 5.
In all cases, activities must be properly assessed for specific risks, and the appropriate PPE selected.
twitter.com/TomorrowsFM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70
