search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
A FLEXIBLE Tilers using the new BAL Flexbone 2Easy uncoupling mat saved time and money o


Preparation time was reduced dramatically with the use of BAL’s new floating uncoupling mat – Flexbone 2Easy – on a prime redevelopment in County Durham.


The 200m² problem screed to be tiled had two days of preparatory work scheduled before installation could even begin. However, this was reduced to just half a day using BAL Flexbone 2Easy.


Tile installation was onto a new pumped concrete screed, which had hairline cracks, residue and laitance on the surface. To fix tiles in a traditional manner - direct to the screed or using a bonded uncoupling mat - would have required the screed to be abraded to remove the laitance and significantly primed at considerable time and cost.


The use of BAL Flexbone 2Easy floating uncoupling mat alleviated the need to abrade and prime the screed, as the only preparation required was a quick sweep of the surface.


The mat was simply rolled out onto the screed, with the self- adhesive mesh bonding the mat edges together. Roll ends were secured with BAL AquaDrain ST-10 tape.


Stone-effect porcelain tiles measuring 800mm x 600mm x 10mm thick were then laid directly onto the matting and adhered with BAL Pourable One flexible tile adhesive and grouted with BAL Micromax2 Smoke.


Karl Fortune, tiler at Fortune Tiling, said: “The mat was incredibly easy to use and saved me significant time and money on preparation and materials. The use of Flexbone 2Easy has saved at least a day and half of preparation time, plus cost savings on primer and adhesive.”


BAL Flexbone 2Easy is said to be a unique mat to the UK market as it is truly uncoupled, protecting floor tiles from lateral movement.


No removal or residue, no removal of laitance and no priming of the surface is needed. This means that contaminated and stained floors, wooden floors, cracked screeds and mixed substrates can be tiled immediately – as long as they are flat, level and rigid.


As well as time savings from the lack of preparation, materials costs are also significantly reduced with no need for primers, plus a massive adhesive saving of 2kg/m², when compared to laying bonded cavity mat systems.


Time trials indicate the removal of subfloor preparation for installations provides a minimum 50% time saving.


Lengthy waiting times on new screeds are avoided as Flexbone 2Easy can be laid on new sand/cement screeds when they are ready to be walked on, or new anhydrite screeds that aren’t fully cured (up to 1.5% CM residual moisture). This means no more projects on hold for weeks on end waiting for the screed to dry.


Fast-track installation is possible as any residual moisture in the substrate is distributed evenly through a system of


46 | SUBFLOOR PREPARATION


perforations and channels in the mat, meaning the screed can fully cure under the tiling with no issues.


BAL Flexbone 2Easy also featured patented GripLock Technology and unique bone structure.


The patented design has been independently tested to provide the highest shear strength (providing more accommodation of higher levels of lateral movement) and the highest tensile strength (to stops tiles ‘popping- off’, or cracking under pressure). These highly flexible and deformable properties ensure all tile installations are protected from lateral movement and pressures.


As well as providing long-term benefits in terms of strength and flexibility, the unique bone structure also makes for significantly faster installations as the design ensures the trowelling-out of adhesive on the surface layer is fast and easy


Karl summed up: “I would definitely recommend the use of this product, particularly if there are issues with the substrate. “It’s a radical solution, but because it’s from BAL and comes with a 25-year guarantee, it is certainly a solution I trust.”


www.bal-adhesives.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68