FLOOR SEALS & FINISHES PROTECT & ENHANCE
LTP director Mark Atkins looks at the issues surrounding the maintenance of external porcelain pavers and advises on how to achieve a lasting wet-look finish.
https://www.ecoprotec.co.uk/product/porcelain-paving-enhancer/
Over the last decade, we’ve seen the popularity of porcelain pavers skyrocket. Generally chosen in large format natural- effects, these tiles provide a wood or stone-look combined with the durability and low maintenance benefits of porcelain. They do, however, get dirty in the same way as traditional pavers which, to some consumers, comes as a surprise.
Just like a limestone or sandstone tile, porcelain pavers can become dirty due to environmental elements, muddy boots, animal excretions, fallen leaves, algae and everything else that they come into contact with. They are really stain resistant but they’re not self-cleaning. Just like a porcelain tile installed indoors, pavers will need to be cleaned to maintain that just- installed look. But, being a textured surface, it can sometimes be quite difficult to release residue that’s become trapped within the high-low surfaces – and that’s where barrier and enhancing treatments can make a big difference.
THE BENEFITS OF APPLYING A BARRIER TREATMENT
https://www.ecoprotec.co.uk/product/pre-grout-protection/
Textured matt porcelain pavers don’t need to be sealed but applying a barrier treatment before grouting can offer multiple benefits. For example, our own water-based ECOPROTEC Pre Grout Protection is designed to protect the surface of the tile from cement and resin staining during installation.
30
https://www.ecoprotec.co.uk/product/pre-grout-protection/
The barrier within our Pre Grout Protection is mildly acidic, so it’s able to penetrate deeply into the textured porcelain’s fissures. Once dry, the treatment leaves invisible active ingredients behind and they cross link within the low points of the glaze. This provides the protection and makes the removal of any residues much easier. It also helps to improve and increase the working time of grouts and jointing compounds. Once residues have been removed and the surface is dry, a further coat makes ongoing cleaning and aftercare easier.
PORCELAIN ENHANCERS – THE CHALLENGES AND THE BENEFITS
Whilst textured, natural-effect tiles are popular, many consumers wanted to switch-up the matt look to something glossy. This created the development of various film-forming sealers but, unfortunately, they didn’t tend to wear well and, when they did de-bond, they were difficult to remove.
We embraced this challenge head-on four years ago, when we started to research our own ECOPROTEC Porcelain Paving Enhancer. Two years down the line, we had developed a water- based solution which we applied to an external test area where delivery drivers stopped to unload goods. We monitored the area every month and, as of late last year, the ‘wet-look’ finish was as good as new. The new treatment, which was launched in
https://www.ecoprotec.co.uk/product/intensive-cleaner/ www.tomorrowscontractfloors.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
