Two-component, epoxy resin, surface applied DPM used as a moisture barrier on cement- based substrates with residual or static moisture. Can be used as a one or two coat system to prevent moisture in the substrate from reaching the floor covering. The product has very low odour, therefore ideal for use in inhabited areas, schools, hospitals etc. Roller applied.
PVC waterproofing and isolating membrane for the installation of internal resilient and textile floor coverings (if dimensionally stable) on cracked, dirty or damp substrates. Can also be used as an on-site floor protection during other construction phases.
Setting Time Final Cure
Coverage (approx) Shelf Life
Packaging
30m2 20m2
at 23o at 23o
per 6kg unit; 5m2 per 6kg unit; 4m2
C - 90 mins C - 7 days
per 1kg unit per coat - 2 coat system per 1kg unit per coat - 1 coat system
24 months
6kg KIT: A:4.5 + B:1.5 1kg KIT: A:0.75 + B:0.25
Dimensions
(L)25m x (W)2m x (D)1.5mm
MAPEPROOF ONE COAT
Two-
component, single coat, epoxy surface applied DPM applied to
MAPEPROOF 1K TURBO
SINGLE COMPONENT, SOLVENT- FREE,
One-component, rapid drying, polyurethane surface applied DPM for use on cementitious screeds, which are not subject to rising damp, but have a residual humidity content higher than the British Standards recommended 75% R.H. (BS8203), prior to the installation of resilient or wood flooring. 2 coat system. Roller applied.
MOISTURE-CURE, FAST DRYING POLYURETHANE SURFACE MEMBRANE WITH EXTREMELY LOW EMISSIONS OF V.O.C., FOR CONSOLIDATING AND WATERPROOFING CEMENTITIOUS SCREEDS
cement-based substrates for controlling residual, static and construction moisture levels of above 75% (BS8203) and below 97% R.H. on sub floors with an effective structural damp proof membrane prior to the installation of resilient, textile and wood floor coverings. Suitable for use with underfloor heating except where wood finishes are to be installed. Trowel and roller applied.
Set to light foot traffic Final hardening time Coverage (approx) Shelf life
Set to light foot traffic Final hardening time
Waiting time between coats Waiting time before priming Coverage (approx)
Shelf life Packaging 60 mins After 2 hours
MIN: 40 mins - MAX: 2 hours 40 mins
0.2-0.4kg/m2 per coat 12 months 10kg Packaging
After approx. 5 hours At 23o 16m2
C 24 hours per 7kg unit
12 months 7kg KIT: A:4.2 + B:2.8
0121 508 6970 |
mapei.co.uk
Mapeproof
1K Turbo
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54
