PROCESS EQUIPMENT UPDATE
ne leading player in high-speed pouch filling machines develops and implements processing facilities and pouching machines that are used primarily in the food, beverage and pet food industries. Tese industries have extremely stringent hygiene standards, which necessitates efficient cleaning of the systems. Te components used in the systems therefore have to withstand not only harsh production environments, but also chemical cleaners and splashing water. Tat also applies to the pneumatic fittings used in the wet areas of the filling machines: even if these components do not come into direct contact with the products, they are used in processes with high requirements for hygiene and are subjected to rigorous cleaning procedures. Among other things, this has
O
consequences for the material used: nickel- plated components provide sufficient protection against corrosion as long as the nickel coating remains undamaged. But they cannot withstand the environmental influences that filling machines are exposed to – which soon becomes evident in the occurrence of pitting corrosion. Stainless steel fittings are less sensitive in such environments, since they feature high resistance to corrosive influences, even without a coating. Tat is why the manufacturer chose fittings from Series 17 of the Eisele Inoxline. Made of stainless steel, they are designed for durability to
20
www.engineerlive.com
PERFECT FIT
withstand both a vacuum of -0.95 bar as well as pressures up to 16 bar for a long-lasting seal with no leaks. Wherever vibrations and tube movements occur in the production environment, the connections are supplemented by the use of threaded fittings with a union nut. Tis prevents uncontrolled release of the tube connection. Due to their high-quality material, the stainless steel push-in fittings are an ideal choice for connecting pneumatic control lines in the wet areas of filling systems. Te fittings combine reliability and durability with optimal hygiene. Tey are designed to meet very stringent requirements with respect to cleaning and corrosion resistance. A broad temperature range from -20 to 120°C makes them quite versatile, and suitably designed fittings can even withstand temperatures from -50 to 200°C. Series 17 components allow the full flow rate inside the tube despite their compact design.
EASE OF HANDLING Te fittings enable very fast connecting and disconnecting of compressed air tubes without the use of tools. Te screw-in end for mounting the push-in fitting on the machine or process valve is sealed with an enclosed O-ring. Te tube only has to be pushed fully into the release sleeve of the push-in fitting. Te collet inside the fitting holds the tube in its position for a lasting, reliable connection with no damage to the tube. Even in the case
Thomas Maier discusses stainless steel fittings for use in filling machines
of frequent connecting and disconnecting – for maintenance purposes, for example – the collet prevents damage to the tube and ensures a tight seal at all times. All it takes to disconnect the tube is to press on the release sleeve. Tis convenience of handling was also
important to the manufacturer of pouch filling machines. In the past, push-in fittings from a different source were used, and the manufacturer was never quite satisfied. Insertion of the tube, for example, required considerable physical force – and releasing the tube was even more difficult for the most part. Te reason for this is that many fittings available on the market have no release sleeve, only a release ring. It has to be pressed with considerable force, which is not only manually difficult, but also bothersome in the long run. Te use of tools, especially in the case of plastic release rings, can easily cause damage to the rings, which makes it even more difficult to release them. Not with Eisele fittings: the large release sleeve requires only little physical force, and enables convenient disconnecting of the tube even after an extended period.
Thomas Maier is MD of Eisele Pneumatics.
www.eisele.eu
THE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
