PITCHCARE CLASSIFIEDS SOIL SAMPLING


Understanding what is going on


Understanding what is going on below the surface is critical for successful turfgrass management. This article discusses the reasons for doing so, the objectives and the results you can expect


Visual inspections, backed up with a professional analysis of soil properties, will give vital information about the condition of the soil and help to produce a more productive environment for plant growth and sustainability.


A simple ‘visual, feel and smell’ inspection of a soil sample can identify many things:


• Thatch content (dead grass and fibre found in the top 5-35mmof the sample)


• Dryness/wetness of soil (soil water content) • Soil compaction (lack of airspace in the soil) • Presence of black layer and algae


• Anaerobic conditions (indicated by a smell similar to rotten eggs)


• Extent of soil layering (indicated by root breaks)


• Root depth and vigour • Pest and disease problems


• Extraneous matter content (glass, ceramics and stone)


The easiest way to make this inspection is by using a soil sampler. They come in different shapes and sizes and are designed for different reasons; some allow you to see a clean profile of your soil without removing it from the sampler, whilst others simply collect a soil core.


On a regular basis (at least once a year) soil samples should be collected and sent away to a laboratory for a detailed analysis. The testing can reveal a lot of important data to help you diagnose any problems and to make an informed decision on future maintenance regimes.


The following five soil tests are the ones you should be aware of:


• Particle Size Distribution (PSD) soil classification (soil type)


• Soil pH (acidity level of the soil) • Soil nutrient status • Soil Organic Matter (OM) content • Soil Toxicity


The standard soil analysis package measures acidity (pH) and estimates the plant-available concentrations of the major nutrients in the soil - phosphorus (P), potassium (K) and magnesium (Mg). Soil acidity is measured as pH (the concentration of H + ions) the scale running from pH1 (very acid), through pH7 (neutral) to pH14 (very alkaline). The normal soil range is pH 4.5- 8.5.


When taking samples for analysis you will, in most cases, be required to collect at least one


144 PC June/July 2020


kilo of material. This is required by most soil laboratories, particularly if undertaking Particle Size Distribution tests to determine the amount of clay, silt and sand in the soil.


A representative sample of soil will need to be taken from several areas of the facility, and at the appropriate depth, usually the top 100- 150mm. For example, taking samples of a football pitch would require taking twenty-four samples (twelve from each half) taken from different areas of the pitch.


Sample on a 'W' pattern over the field; for a regular shaped field this means six cores per leg of the ‘W’. All the soil material is mixed together and put into one bag and sent away to an approved registered lab for analysis. The same ‘W’ technique should also be used on fine turf areas (golf and bowling greens).


Remember to clearly label all samples and record the time, location and date when they were taken.


Guide to sampling


1. Use of a suitable tool (cone auger, screw auger, corer etc.) which facilitates and encourages the taking of more rather than fewer cores, of a uniform size and down to the full depth of sampling


2. Use equipment and packaging that will not contaminate the sample. Galvanised sampling tools are unacceptable for trace element analysis


3. Label samples clearly


4. Sample to a consistent depth, usually between 100-150mm


5. Divide the field into areas which are as uniform as possible in soil type. Small areas of different soil, e.g. wet, chalky, shallow, stony etc. should be excluded


6. Avoid taking samples from mole hills, urine patches


7. Take at least between twenty to twenty- five cores from each area to be sampled and put them together to form a single representative sample. The numbers of cores should not be restricted simply because the container is full! Thoroughly mix all cores and take a sub-sample from this for despatch to the laboratory - this must be done carefully


8. Ensure the sample represents the whole area. Sample on a ‘W’ pattern over the field; for a regular shaped field this means six cores per leg of the ‘W’


9. Avoid sampling under extremes of soil conditions, e.g. waterlogged or very dry soil


A range of soil samplers are available in the Pitchcare shop:


The soil profile sampler is a very useful tool, especially for fine turf situations where you want to see a wide profile of the green down to a depth of 200mm.


The impact 50mm soil sampler is specifically designed for taking samples on cricket squares (heavy clay soils), the sampler takes a 50mm wide core down to a depth of 300mm.


Standard core samplers come in a range of diameter sizes - 16mm, 20mm, 25mm, 38mm - usually to a depth of 300mm.


Samplers are available in the Pitchcare Shop: https://www.pitchcare.com/shop/search/soil%20 sample


For a soil sampling kit and an array of different analyses, visit Pitchcare PWS analysis service at https://www.pitchcare.com/shop/search/PWS%2 0analysis


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156