search.noResults

search.searching

note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
DuPont’s holistic approach achieves


extraordinary results at BRE


Architects, builders, developers and savvy home buyers are beginning to understand not only the importance of airtightness, but also the potential complexity in getting it right. There is, however, a very simple solution: work with a proven system of carefully developed and tested products - and the expert team behind them.


Recently, a project to bring key membranes, AVCLs, tapes, sealants - and vitally - correct installation methods together into one ideal ‘passive house’ demonstration was undertaken at BRE (Building Research Establishment), with assistance from DuPont. The results “impressed everyone”, according to Nick Williams, DuPont™ Tyvek®


Technical


Manager UK & ROI, who facilitated the project and emphasises that, “we also know that with new product developments, or different DuPont product combinations, the performance could be even better.”


As part of its customary standards of independent and thorough testing, the BRE built a compact timber structure on site. The following products were then fitted, taking great care to correctly install and properly seal at laps and penetrations, and in all corners, curves and awkward spaces: Tyvek®


Supro to the roof, Tyvek® walls, AirGuard® HouseWrap to the exterior of the Control AVCL to the interior of the walls, Tyvek®


throughout the construction, plus the newly launched Tyvek® to windows, doors, rafters, floors etc.


tapes FlexWrap EZ


Once the structure was complete, a blower door was fitted and the structure pressurised to the industry standard 50Pa. Test results were recorded after each stage of completion. The final tests were conducted when the latest low emissivity Tyvek®


@50Pa (0.24 ACH), well below the Passivhaus standard which in itself is a difficult level to achieve.


According to Dr Paul Blackmore, Associate Director, Fire and Building Technology Group BRE, “The testing showed the importance of maintaining an airtight barrier around the test building to prevent unintended air infiltration/exfiltration. The DuPont Tyvek®


The imperatives of a variety of regulations are one thing, but the key drivers are emerging from the market itself and from the appreciation that airtightness brings not only sustainability benefits but also increases both cost-efficiency and occupier comfort. Current UK regulations call for air leakage figures below 10m3/hr/m2 @50Pa and controls are bound to get only stricter in the future, while the benchmark Passivhaus standard is 0.6 ACH, equivalent to around 0.3m3/hr/m2 @50Pa.


wall membrane. This resulted in an extremely impressive figure of 0.12m3 hr/m2


membrane was fitted as the external /


and AirGuard®


membranes and tapes provided an almost complete air tight seal around the walls and roof of the test building.


The air leakage measurements with the test building wrapped in DuPont membranes with DuPont tapes were as low as 0.12m3


/hr/m2 and 0.24


ACH@ 50Pa which significantly exceeds the air tightness requirements of the Passivhaus standard for low energy buildings.”


DUPONT


TEL: 01275 337660 49


A vital lesson, both from the BRE exercise and experience in the field, is that while airtightness can be straightforward to achieve using the right products and systems, there can be no weak link in the chain. A reduction of specification quality at any aspect of the envelope, a key step or process missed, or any careless or incorrect installation and the results will be as disappointing as the waste of time or money. There is simply no substitute for quality and expertise, and cutting corners - or failing to seal them properly - just doesn’t work. Furthermore, even with the best products and the best will in the world, those ‘hard to reach’ areas will also need special attention.


This is where the holistic approach from DuPont becomes even more indispensable, with the joined-up thinking of products such as DuPont™ FlexWrap, which is designed to expand, contract, bend and shape concertina style, to fit into any awkward area to be sealed. A new version of the product, Tyvek®


FlexWrap EZ, is about to hit the market, bringing


even further benefits for both performance and installation to the new generation of responsible construction.


WWW.CONSTRUCTION.TYVEK.CO.UK


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56