Repair, Refurb, Retrofit ArcHaus receives a facelift from Remmers
Waterproofing simplified with Remmers Multi-Tight 2K
The exterior of this iconic building was suffering with high levels of damage, including salt ingress and excessive cracking to the render and brickwork.
Salt Inhibitor was used as a ‘masonry salt blocker’ and applied to the exposed brickwork. Large areas of the render were repaired with Restoration Render and the deep section repairs were completed with Remmers Betofix R2, a fast curing, high strength concrete repair mortar.
OS Concre Fill and Impregnation Primer were also applied prior to the application of the final protective coating system.
To mitigate reflective cracking in the future, Remmers Elastoflex system with reinforcement was applied throughout, giving a high degree of finish to the exterior of this 1930’s landmark building.
REMMERS (UK) LTD
Multi-Tight 2K is a new, flexible, mineral based waterproofing product which has all the performance properties of older technology polymer-modified thick bitumen emulsions, whilst being ‘bitumen free’.
Using unique rubber granulate filler technology, Multi-Tight 2K has a crack-bridging capacity which is five times more effective than standard flexible mineral-based waterproofing systems.
The versatility of the product allows it to be used to waterproof below ground externally and internally offering excellent resistance to ground or water pressure as well as frost and salts.
It is very quick and easy to apply by trowel or spray application, has fantastic levels of adhesion to most substrates including old bitumen and dries very quickly in less than 18 hours.
Multi-Tight 2K is UV stable but can also be over-coated with Remmers Concrete Acrylic in any colour allowing clients to aesthetically blend in areas of waterproofing on building facades.
Waterproofing your building has now been truly simplified by Multi-Tight 2K. TEL: 01293 594010
WWW.REMMERS.CO.UK THERE CAN ONLY BE ONE!
Waterproofing Simplified with
Multi-Tight 2K
l Easy and quick to apply by trowel or spray
l Extremely fast drying time l Universal use: internal or external and new & old buildings
l Unbeatable flexibility l Excellent crack-bridging capability >2mm
l Strong resistance to hydrostatic pressure
l Highly adhesive to most common building substrates
l Overcoat in just over 4 hours l UV-resistant l Can be over-coated with Remmers coatings
l Extreme resistance to frost and salts
l Solvent & bitumen free - low odour
REMMERS (UK) LTD Unit B1 The Fleming Centre, Fleming Way, Crawley, West Sussex RH10 9NN Tel: 01293 594010 Fax: 01293 594037 Email:
sales@remmers.co.uk Web:
www.remmers.co.uk
47
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56
