OFFSHORE LOGISTICS
HOULDER AND MPI OFFSHORE PROVE BIGGER IS BETTER BY INSTALLING 650T PILE GRIPPER ARMS
“THE CHALLENGE OF HANDLING OFFSHORE WIND TURBINE PILES HAS GROWN ALONG WITH THEIR SIZE” COMMENTED FrEDErIC PErDrIx, ChIEF TEChnICAL oFFICEr, AS HOULDER DELIVERED ITS LATEST PIECE oF BESPoKE
EQUIPMENT MPI DISCOVERY
The pile Gripper Arms, installed this week, stabilise 6m diameter 650t steel piles as they are driven into the seabed by the MPI Discovery installation jack up vessel.
Installed on the vessel’s stern below deck level, they provide resistance to wave, tide and current forces in water depths of up to 40m. Their position and the additional control this provides significantly reduces installation times providing a valuable enhancement to the Discovery’s capability.
GREAT OPPORTUNITY Frederic went on to say “MPI’s specific requirement was a great opportunity for our engineers to demonstrate their ingenuity and ambition. The result combines heavy duty structural, mechanical and hydraulic engineering with precision control.”
Peter Robinson, Managing Director of MPI Offshore Ltd said, “We are delighted with the final engineered solution created by Houlder Ltd. Both their engineers and ours have worked in collaboration to construct this equipment to exacting standards. Such innovation is part of MPI’s on- going development, and will provide demonstrable improvements to the monopile process for our clients.”
SPECIFICATIONS
The hydraulically driven arms, weighing circa 90t each, have three main cylinders: one to deploy the arms from their stowage position and two to provide a horizontal gripping motion able to withstand up to 150t of horizontal load in any direction.
These cylinders are actuated by touchscreen and single joystick controls that allow an operator to engage the arms, close the jaws and then maintain the pile in the vertical plane as it is hammered down. Any risk of operator caused collision is reduced through automated constraints based on the pile diameters.
DEDICATED TEAM
Houlder’s Project Manager, Andy Lovell, added “The contract was managed by a dedicated team from Houlder’s Tyneside office and used engineering capability from
The company manufactured over 400 metres of stainless steel hydraulic pipework and installed, flushed, pressure tested and commissioned the system and assisted in the design of the pipe routing, from which the customer was able to produce as-built final drawings, and also supported the mechanical build phase, with their engineers stroking the hydraulic cylinders and supplying their fleet of hydraulic rigs.
OPPORTUNITY For IMh, it was a fantastic opportunity for their Piping and Test Engineers to demonstrate their skills working alongside the team at Houlder – an ambitious leader in the fast-developing technology of the wind energy sector.
company offices across the UK. Houlder acted as MPI’s design and engineering partner from initial concept design through to delivery. This included deck arrangements which, given the constraints of a working installation vessel, focused on minimising the required footprint. The company also designed and validated the foundations and required deck modifications.”
INDUSTRIAL MARINE HYDRAULICS Technical hydraulic specialists, IMH, completed their important part in this significant turnkey project for houlder Ltdinstalling pile gripper arms onto the vessel, MPI Discovery.
56
www.windenergynetwork.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116