4 Pin Pin-Style
Our basic pin design is available in more than 20 options (see page 24).
Pin & Sleeve An alternate fastening system for high impact applications.
For 65mm, 80mm and 100mm thick screen panels.
PolySnap®
A patented Polydeck design that quickly and easily snaps a screen panel into place, requiring only a mallet for installation and a screwdriver for removal.
PART # TYPE
F3000547 Black polyurethane standard head
Bolt-down
Bolt-down rubber is effective for tough applications such as scalping screens where open area is not as critical.
Specialty ferrule inserts for bolt-down applications PART #
030567002 030567012
030567004 030567016
030567026 F3000323 030567003
PolyRail™
This PolyRail™ system provides a simple bolt-on rail that converts a profile wire or punch plate deck for our 2’ wide by 1’ long PolyRail™ panels. Most commonly used in the coal industry where the standard support frames use either 3” wide channel or angle iron stringers located on 2’ centers.
TYPE Steel
Steel THREAD TOP 3/8” - 16 Flat Stainless Steel 3/8” - 16 Flat 1/2” - 20 Hex
Stainless Steel 1/2” - 13 Flat Steel
Steel Steel
1/2” - 13 Flat 1/2" - 13 Hex 3/4” - 10 Flat
PART # TYPE
F3000558 Red polyurethane large head
Pin-style and Pin & Sleeve ferrule insert
ITEM F3000329 Standard Head Ferrule Insert Large Head Ferrule Insert
Fastening Systems Pin-Style
Polydeck Screen Corporation Pin & Sleeve
See page 17 for info on our PolyRail™ stringer protectors.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28