10
Section Header
Specialty Screen Panels Cutter Panel for Heavy Media Recovery
Especially suited for static flume applications, the newly designed Cutter screen panel is installed slot against flow and is used to achieve significant moisture reduction and aid in magnetite recovery.
Polydeck Screen Corporation NEW PRODUCT
Small surface humps that are higher in the front and shorter in the back pull water down into the aperture at the leading edge. APERTURE SIZE THICKNESS FASTENING 1 x 304mm 12” x 12” 30mm VST - Vector Slot Technology for Heavy Media Recovery
This PATENT PENDING design incorporates slots at opposing 45 degree angles creating a zigzag flow which reduces fines racing, the tendency for particles on a vibratory screen to ride or race on top of a screen panel. The VST design also reduces plugging or pegging problems associated with fine sizing by reducing the retention time a particle has over a slotted opening.
4 pin, 4 snap
VST panels are available in both hard and soft durometer polyurethane.
APERTURE SIZE THICKNESS 0.65, 0.85, and 1mm 12” x 12” 30mm Herringbone
The unique herringbone design increases drainage rates, particularly for static sieve applications where recovery of heavy media is critical.
FASTENING 4 pin, 4 snap
APERTURE
SIZE
THICKNESS 1 x 21mm, 3 x 21mm 12” x 12” 30mm
FASTENING 4 pin, 4 snap
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28