Your Trusted Screening Resource Heavy Duty Dewatering Panel
This screen panel was designed to carry the weight of thick bed depths and heavy loads. With its deep bridges, heavy duty steel inserts, and extra lateral supports, this panel adds the kind of stability to your screen that could eliminate the need for added sub-structure. At 40mm thick and with slot widths as small as 0.1mm, this panel is a dewatering workhorse.
The heavy duty dewatering panel derives much of its strength from a more substantial steel insert featuring two lateral center bars instead of one.
Available as slot with flow or slot against flow. APERTURE
SIZE
0.1 x 15mm 12” x 12” 40mm 0.25 x 15mm 12” x 12” 40mm 0.5 x 15mm 12” x 12” 40mm
THICKNESS FASTENING 4 or 8 pin or snap
4, 6, or 8 pin or snap 4, 6, or 8 pin or snap
Rubberdex® Trampoline Panel for blinding and buildup
For dry screening applications where material blinding and buildup is a problem such as at discharge, our trampoline panel may be the answer. These panels have a hollow bottom which allows the wear surface to be thinner, creating the trampoline/ flexing effect. Standard trampoline panels utilize our soft rubber compound but are also available in a harder durometer for heavier duty applications.
Available in: 8 pin fastenings for 40, 45, and 50mm thicknesses.
12 pin or 12 pin & sleeve fastenings for 65, 80, and 100mm thicknesses.
Deeper bridges add strength and extend wear life.
Specialty Screen Panels
Section Header
11
Trampoline Panel SSP - Static Screen Panel
The SSP screen panel features ridges molded with flow to intensify dewatering in smaller materials like sand and fines.
Polydex®: 0.25mm x 9mm to 1.2mm x 14.5mm.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28