Your Trusted Screening Resource Diverter Panel Kits


• To redirect material in uneven loading conditions.


• On a screen’s discharge end to divert material to the middle, reducing chute wear.


• To divert material away from mechanism flanges, reducing wear on through- type shaft mechanisms.


Each kit comes with the all the needed hardware:


• bolts • backing plate • lock nuts • washers


ITEM # DIVERTERKIT-S DIVERTERKIT-M DIVERTERKIT-L DIVERTERKIT-XL Scrolls


Can be bolted on or molded into polyurethane screen panels and arranged within the trommel to orient and slow down the flow of material. Scrolls are available in different sizes and shapes depending on the application requirements.


SSP - Static Screen Panel


Ridges molded with flow to intensify dewatering in smaller materials like sand and fines.


Available in opening sizes: 0.25mm x 9mm to 1.2mm x 14.5mm.


DESCRIPTION


2” x 6” x 12.38” 3 bolts


2” x 10.5” x 12.38” 3 bolts


2” x 10.5” x 12.38” 3 bolts


2” x 11” x 22.7” 4 bolts


FOR THICKNESSES 30-45


30-55 60-100 55-100 Skid Bars


Can increase wear life by preventing extra-large material from hitting the panel surface. Available on Polydex® and Rubberdex®.


NEW PRODUCT


Polyurethane, injection molded, and easy to install, bolt on diverters can be used in several ways:


Deflectors


Available on the edges or middle areas of screen panels, deflectors help redirect material toward the middle of the panels to maximize screening efficiency.


Surface Features


Section Header


7


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24