18 Conversion Accessories PipeTop II™ Crown Adapters


Easily switch from a flat deck with our modular panels to a crowned deck using wire cloth. Molded to various heights, they enable a crown to be formed when using side-tensioned wire.


Polydeck Screen Corporation PolySnap® Adapter Strips For Channel Frames


A 2” wide polyurethane strip placed atop a channel stringer to allow quick and inexpensive conversion to our PolySnap® screen panels.


Pin-Style PART #


F6000385 F6000388 F6000391 F6000389 F6000395 F6000383 F6000392 F6000394 F6000390 F6000384 F6000393 F6000381 F6000387 F6000386


SIZE


1/2” high 5/8” high 3/4” high 7/8” high 1” high


1-1/8” high 1-1/4” high 1-3/8” high 1-1/2” high 1-5/8” high 1-3/4” high 1-7/8” high 2” high


2-1/4” high


Doubledex System Doubledex pillars are used to: • produce additional product • improve screening efficiencies


• convert a single deck to a double deck to protect a small aperture panel from excessive impact or wear.


PolySnap® Adapter Pins


Complete the conversion of older style frame systems to accept our versatile PolySnap® fastening system when coupled with any of the adapter strips.


HEIGHTS COMPATIBLE PANELS 80mm, 120mm, 160mm 30mm and 40mm thick pin-style panels


PART # TYPE F3000559 Standard-head, black F3000560 Large-head, red 071222031 Standard-head extended shank, green 071222002 Large-head extended shank, red


PART # SIZE 040729004 2” wide x 12” long, black (2 pin/ft.) 040729006 2” wide x 12” long, green (3 pin/ft.) 040729007 2” wide x 10” long, green (3 pin/ft., for grid frames)


PolySnap® Adapter Strips For Original PipeTop™ Frames


PolySnap® PART #


F6000566 F6000567 F6000568 F6000569 F6000570 F6000571 F6000572 F6000573 F6000574


SIZE 1” high


1-1/8” high 1-1/4” high 1-3/8” high 1-1/2” high 1-5/8” high 1-3/4” high 2” high


2-1/4” high


A polyurethane strip placed atop a non-threaded PipeTop™ stringer to allow quick and inexpensive conversion to our PolySnap® screen panels.


PART # SIZE 040729008 12” long - 2 pin/ft.


PolySnap® Adapter Strips For Angle Iron Frames


Polyurethane strip that fits on angle irons with 23mm holes protecting the steel and allowing the use of PolySnap® fastening.


PART # SIZE 080306001 3” wide x 3/8” thick


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24