SHOWCASE
Crowcon’s Modular Gasmaster Control Panel Monitors up to Four Gas Detectors
C enter 822
University of Manchester
V
ictoria Irving, in charge of maintenance at the University of Manchester Dalton test facility
looked at CMMS system to replace their paper based preventative system. " We had a lot of equipment that needed to be maintained & the paper based system was not working for us".
Looking for a maintenance software system led her to the Workmate VM system from CVL "The feel of the navigation around the system
was good, and it seemed to be flexible enough to deal with our requirements."
CAYMAN VENTURE Tel: 0191 2963816 Web:
www.cayman.co.uk
rowcon’s new Gasmaster control panel has a modular design meaning users only need purchase the required number of input modules. It can easily be extended by adding more modules at a later date. Gasmaster monitors up to four gas detectors or four fire zones, all from a single location. Simple to operate, the large multilingual LCD display shows gas levels from all detectors simultaneously and allows quick and easy system adjustment and testing from the control panel. It can operate as a stand-alone unit or interface with any alarm or visual warning devices and control systems. In addition to standard 4-20mA-type gas detectors, Gasmaster can also be used with mV pellistor-type flammable gas detectors, which are significantly lower in cost than 4-20mA-types as they have no internal electronics. Sensor calibration is performed via the Gasmaster user interface: once commissioned, mV pellistor-type detectors do not need to be accessed until the sensor needs replacing – usually 3-5 years after installation. In addition, power to mV pellistor-type detectors is automatically cut if the gas reading exceeds 95% of the gas’ LEL (Lower Explosive Limit) to prevent sensor damage.
Crowcon Detection Instruments Ltd Tel: 01235 557700 Web:
www.crowcon.com
New FlexiEdge fast-action industrial doors – just £90 a month!
tertil Stokvis has introduced a special offer alongside the launch of its FlexiEdge range of fast-action industrial doors. Providing exceptional safety plus unrivalled resistance to wind, weather and impact damage, the new doors are available from just £90 a month. The new FlexiEdge range comprises 16 models of many different types and styles including internal and external doors,
S all-weather doors, cleanroom and
freezer/coldroom doors plus emergency exit doors incorporating breakthrough curtains. Standard models are available in widths up to 11 metres and heights of 5.5 metres whilst bespoke and special sizes may be specified. The FlexiEdge range is so new, it’s not yet on our website. For details of the launch offer, call the FlexiEdge Hotline on 0870 770 0471.
enter 821 Stertil UK Ltd Tel: 08707 700471
ESAB Welding consumables cover all aspects of pipeline welding
he ESAB range of consumables for civil and industrial steel pipeline welding includes products that cover all the special materials and welding processes that may be required.
T
These high productivity consumables are designed for the widely used manual welding process, but also cater for semi-automatic and fully automatic welding applications that are being more widely adopted, particularly on long pipeline routes. Manual welding using coated electrodes remains the most popular method of installing pipelines thanks to its ease of use and versatility.
Semi or fully automatic
welding process provide higher productivity and utilise both solid as well as flux cored welding wires.
Other welding techniques include the use of welding “bugs” in response to the shortage of skilled welders and the requirement to achieve welds of the highest quality. These machines have substantially shortened pipeline construction times and in many cases enable the welds to be deposited to a higher standard than when manual welding. ESAB has a full range of consumables products for this segment of the pipeline industry. ESAB's Pipeweld range has been tested to meet all the requirements of the most stringent pipeline mechanical testing criteria. Pipeweld cellulosic and basic low hydrogen electrodes, self-shielded and gas shielded flux cored wires as well as solid wires have been developed for specific grades of pipeline steel. Typically, the ESAB low hydrogen range of electrodes for uphill and downhill welding is suitable for modern pipeline steels with elevated steel strengths and provides the required combination of high weld metal strength, good low temperature toughness and reduced risk of hydrogen induced cracking. These basic electrodes are supplied in VacPac vacuum packaging to preserve their low moisture condition until the moment of opening, whilst their low moisture absorption properties will guarantee safe exposure for 12 hours when the foil is left in place. Pipeweld flux cored wires include all positional, low hydrogen versions for applications covering the welding of pipe and pipe components with impact toughness requirements down to -40 degrees C. Pipeweld Solid MAG welding wires include both copper coated and non-coated versions, whilst for high deposition submerged arc welding and double jointing applications there is a full range of consumables available, including OK Flux 10.62.
ESAB Group (UK) Ltd Tel: 0800 389 3152 Factory Equipment NOVEMBER/DECEMBER 2013
www.esab.co.uk enter 824
he Shepherd Neame brewery, founded in 1698 in Faversham Kent, has become one of the oldest buildings in the Country to be fitted with a bespoke centralised vacuum system. Spilt malt husks and malt dust presented a problem throughout the production area and silo floor. Site personnel had been using mobile vacuums but they had fallen into disrepair and in desperation staff had resorted back to using the old fashioned broom. Chief Engineer for Shepherd Neame, Jeff Williams commented on the installation; ‘The new system is user friendly and highly effective compared to our previous cleaning methods. Nilfisk- CFM were very professional from survey through to final commissioning and satisfied our requirement at a reasonable cost.’ Nilfisk are one of the world's largest manufacturers of commercial and industrial cleaning equipment. From Tub Vacs through to Grounds Maintenance and Road Sweepers Nilfisk offers a complete and affordable solution to all cleaning challenges.
T
To book a survey throughout the UK or for further information from the Nilfisk-CFM team contact 01768 868995
www.nilfisk-cfm.co.uk
enter 825 31 Britain’s oldest
brewer cleans up with Nilfisk-CFM
Web:
www.stertiluk.com enter 823
Advertorial
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56