This page contains a Flash digital edition of a book.
TR DU


POOLS CTS Moulded-in inserts


part of standard range Spirol Industries has introduced a new range of inserts intended to be placed in a plastic mould prior to plastic injection.


T


he Series 41 and 45 inserts can be used in applications where torque and pull-out/through resistance are required. They feature a hexagonal head on each end and a large centre undercut, with this design providing a high


level of bi-directional torque resistance and high tensile strength. The Series 41 is a through hole


moulded-in insert and Spirol Series 45 a blind-end moulded-in insert. They do not require any specialised insertion tools as the operator places the insert directly into the mould prior to plastic injection. In addition, Spirol has designed these inserts to simplify


orientation and placement on to the mould core pin, thereby


increasing productivity and reducing potential scrap rates.


Low thermal expansion epoxy


Master Bond Inc says that its Master Bond EP30LTE-LO, formulated with a special blend of polymeric and inorganic materials, features unparalleled dimensional stability and sets new standards of performance for bonding, sealing, casting and coating applications in the aerospace, electrical, electronic, chemical, optical, and computer industries.


T


his two component epoxy combines performance with a very low thermal expansion coefficient, which Master Bond says is a significant breakthrough from the high thermal expansion that is typical of most epoxy compounds.


Serviceable over the wide temperature range of -60°F to 250°F,


EP30LTE-LO cures at room temperature with 85% of its maximum strength developed within 48 hours. Faster cures are possible at elevated temperatures. Master Bond points out that this 100% reactive epoxy features


an exceptionally low coefficient of thermal expansion of 12x10-6 in/in/°C and a low shrinkage rate of less than 0.0002 in/in. It also bonds well to metals, glass, ceramics, wood, vulcanised rubbers and most plastics, and produces bonds with a tensile strength over 5,000 psi. This electrically insulative system resists thermal cycling and


chemicals including water, fuels and many acids, bases, salts and organic solvents. It has a long working life of up to 60 minutes for a 200g mass. EP30LTE-LO has a 10 to 1 mix ratio by weight and can be easily


applied with a spatula, knife, trowel, brush or paint roller. It can also be readily cast as thick as 1 inch without undue exotherm developing. EP30LTE-LO is available in half-pint, pint, quart, gallon and five gallon container kits.


Abbey Clamps ..................................15 ACKU Metal ......................................15 ACT Fasteners & Components ......119 Action Can......................................151 ADI Supply Ltd..................................66 Adolf Pühl GmbH & Co. KG..............93 Advance Spares Ltd .......................144 Albert Pasvahl GmbH & Co..............63 Alfran Fasteners ............................163 Allbolts Ltd.....................................139 Alloy & Stainless Fasteners Inc, ....101 Ambrovit SRL ...................................13 Anochrome Group..........................119 Arpel Ltd ........................................143 Arrow Fasteners Company ............149 Autonic Engineering.........................49 Avon Stainless Fasteners...............166 Baker & Finnamore .......................143 Bendfast ..........................................23 Berdan Bolt & Nut Co.Ltd. ..............89 Bierbach GmbH & Co. KG................67 bigHead Bonding Ltd .......................44 Biing Feng Enterprise Co., Ltd ......113 Birlik Baglanti ................................160 Bossong ...........................................83 Bralo...............................................161 Brighton Best.......... 4-5, 10, 12, 14, 16 Brooks Forgings...............................37 Bülte Plastiques SA.........................63 Chatsworth Computers Ltd ...........133 Chemfix Products Limited.............103 Ching Chan Machinery...................129 Coventya SAS .................................123 De Wit B.V.......................................167 Deepak ...........................................108 Degometal........................................33 Dejond Cold Forming.....................102 dk Business Solutions ...................131 Don Quichotte B.V. .........................160 Dörken MKS-Systeme GmbH........117 DS Fasteners Ltd ...........................155 E.U.R.O. Tec GmbH..........................23 EFC International.............................53 Electra Engineering Services ..........85 Emek Rivets Co Ltd..........................31 Emhart Teknologies...........................7 Etanco GmbH...................................84 Everest Overseas ...........................137 Evolution Fasteners .........................87 EW Menn GmbH & Co. KG.............114 F K Moore Limited .........................159 Fastbolt ..............................................2 Fasten.it ...........................................59 Fastener Expo Jiaxing 2011 ............53 Fastener Fair - Brasil ......................94 Fastener Fair - Hannover ................51 Fixi Srl ..............................................66 G & B Fissaggi Srl............................33 Gage Bilt ........................................151 General Inspection, LLC. .................47 Global Engineered Products............37 Go Pak..............................................55 Goebel GmbH......................... 152-153 Graewe GmbH & Co.KG...................33 Growermetal ......................................3 Hafren Fasteners ...........................167 HECO-Schrauben.............................91 Heinz Soyer ......................................81 Hexstone ..........................................77 Hommel + Keller ...........................162 Hugo Benzing GmbH & Co KG.......137 Ingramatic......................................115


170 Fastener + Fixing Magazine • Issue 71 September 2011


Inox Mare SRL..................................95 ITW...................................................79 Jubilee Clips...................................159 Koenig Verbindungstechnik.............47 Kohlhage .........................................75 Landmark Fasteners .....................105 Lederer.............................................20 London Screw Company Ltd..........156 Lucky-Winsun Enterprise Co Ltd ..107 Lusavouga........................................97 M&W Fastener Co.,Ltd ....................35 Martyn Price Bolts & Nuts ..............17 Mecavit Srl .......................................29 MEMFast ........................................139 MKT..................................................67 Multiple Overseas Exports...............11 Nakashimada Engineering Works...61 National Machinery..........................27 ND Industries........................... 19, 119 Nexo Industries..............................105 NOF Metal Coatings Europe..........127 Nord-lock...........................................1 Nordic Metalblok Srl..........................9 Norm Civata AS................................21 Norma..............................................39 NSJ...................................................49 Orbit International ...........................63 Ornit Blind Rivets...........................159 Pee-Wee.........................................114 Peter Schröder GmbH ...................133 Pinstructure Ltd...............................15 Precision Technology Supplies......105 Prelok.............................................121 Ray Fu ............................................158 Reyher ..............................................49 Rivit Srl...........................................171 Rosmil Industrial ...........................133 Rotor Clip.......................................107 Saima Corporation.........................156 San Shing Fastech Corp ................172 Scell-it..............................................57 Schnorr GmbH...............................139 Shanghai Fast-Fix Rivet.................169 Shanghai Rivet Manufacture..........157 Sheh Kai Precision Co Ltd .............100 Shin Chun Enterprise Co Ltd...........25 Smith-Bullough Ltd .......................137 Specialinsert Srl ............................138 Spirol ................................................23 Stafa Holland BV..............................55 Staytite ........................38, 63, 154, 166 Super Nut Industrial Co Ltd ..........168 Tecfi S.p.A. ........................................69 Tecno Impianti SRL ........................116 TFC Ltd...........................................163 Titibi..................................................81 Top Screw Metal Corp ......................81 Trojan..............................................143 TWTC ................................................45 UBK Spa.........................................155 Vibration Master ............................125 Vipa SPA.........................................167 Viteria Fusani SRL ...........................31 Vlier Products ................................104 Vogelsang GmbH.............. 37, 107, 155 Volt Industrial Plastics, Inc..............73 Vorpa Officine Meccaniche snc........71 VVG - Befestigungstechnik ............141 Wafios Umformtechnik GmbH.........99 WASI ...............................................163 Yi Tai Shen Co., Ltd. .......................165


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172