the product more accessible. Verti-Lift tilt tables feature easily accessible internal power units, heavy-duty cylinders, hand or foot controls, and heavy-duty tubular frames. Lifetime lu- bricated kingpin bearings help ensure a long service life with no maintenance. Optional accessories which can be added to suit particular requirements include accordion skirts, over- sized platform, portability package, and a variety of conveyor tops. Verti-Life tilt tables are also available in pneumatic and custom designs. Verti-Lift Inc.
Ph: 502-361-0180 Web site:
www.verti-lift.com
Burn Table Lift Magnet System Air-operated burn table lift magnet system easily and quickly moves multiple parts or cutouts up and off of burn tables. Manual handling of multiple parts and the need for operators to climb on a burn table are eliminated. Power- ful magnetic circuit
design enables an advanced transfer system to also lift single sheets or plates up to 3" (76-mm) thick from a stack to load the table. When activated, a stainless steel stripper pan retracts to engage the steel parts with high magnetic holding force. To release, air cylinders push the stripper pan away from the magnetic head to create a gap and break the holding force. The system uses permanent magnets and does not require a controller so there are no power failure concerns. Standard models include 24, 48 and 120" (609, 1219, 3000-mm) designs to accommodate most common plate or sheet sizes. Eriez Magnetics Ph: 888-300-3743 Web site:
www.eriez.com
Jaw Force Gages Jaw Force Gauges allow users to accurately measure the force applied to each chuck jaw independently, so that potential problems can be diagnosed and corrected before a failure occurs. Gages read in pounds of chucking force
per jaw, the holding force available for that specifi c jaw (rather than a total force of two or three jaws as other gauges measure). Poorly gripped parts can be dislodged by tool pres- sure, resulting in produc- tion losses and an unsafe operation, The Jaw Force Gauge allows manufactur- ers to cut production losses by verifying rated jaw force, identifying potential safety hazards, and establishing a
maintenance schedule. With a force range from 0 to 30,000 lb (0–13,500 kg), simple-to-install and easy-to-use Jaw Force Gauges are ideal for chucks from 6 to 18" (152–457 mm) and from a wide variety of manufacturers. Dillon Manufacturing Inc. Ph: 800-428-1133 Web site:
www.dillonmfg.com
High-Feed Side End Mills CoroMill Plura HFS (high-feed side-milling) end mills are de- signed for high performance and security in side and pocket milling operations. Typical applications include steel and stainless steel, as well as diffi cult-to-machine materials such as heat-resistant super alloys (HRSA) and titanium. CoroMill Plura HFS end mills enhance productivity and process reliability for milling strategies like trochoidal milling that achieve high feed rates,
min- imum vibration, and longer tool life by provid- ing constant maximum chip thickness and
short arc of contact. Plura HFS uses the complete cut- ting length of the end mill and achieves higher metal removal rate with smaller diameters than indexable milling cutting and traditional milling strategies. GC1740 grade resists bending forces generated when using a 4×DC length of cut. This is especially needed when the component has a large depth of cut and cutting width. Sandvik Coromant Ph: 201-794-5000 Web site:
www.sandvik.coromant.com/us
March 2016 |
AdvancedManufacturing.org 103
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126