This page contains a Flash digital edition of a book.
LIKE HOME een used to create a Luxury finish in two residential properties. A VICTORIAN REFURBISHMENT


High-performance Styccobond B95 flexible wood flooring adhesive from F. Ball and Co. Ltd., the UK's leading manufacturer of flooring adhesives and subfloor preparation products, has been used to install parquet herringbone wood block flooring in the refurbishment of a residential Victorian property in Grantham, Lincolnshire.


Lambourn Flooring & Interiors, of Lincolnshire, was contracted to install the 100m2


of wood flooring in the


property that had been totally stripped and boarded over with flooring grade plywood.


To install the parquet herringbone wood flooring, Lambourn Flooring & Interiors used Styccobond B95 flexible wood flooring adhesive, on the plywood boards. Styccobond B95, is a high performance, one part, flexible, moisture curing polyurethane adhesive used for installing a wide range of wood floorcoverings. It is non-flammable and is quick setting to develop a high bond strength. It is protected against bio- degradation and is suitable for use over normal underfloor heating.


Matt Blackbourn of Lambourn Flooring & Interiors, said: “We use F. Ball


products on every single flooring installation that we do; they’re tried and tested and always allow us to create a professional and aesthetically pleasing floor finish. Using Styccobond B95 in this Victorian property enabled us to create an impressive flooring that our client was very pleased with.”


“Using Styccobond


B95 in this Victorian property enabled us to create an


impressive flooring that our client was very pleased with.”


Styccobond B95 can be used for securing engineered boards (semi- solids) and a wide range of plank and wood strip flooring up to a maximum length of 1.5 metres.


Styccobond B95 can be applied to Stopgap smoothing underlayments, structurally sound, smooth, dry subfloors of concrete, sand/cement screed and plywood (Minimum 6mm flooring grade WBP). It can also be applied directly to Stopgap waterproof surface membranes within 24 hours of the membrane curing.


Due to advances in polymer technology, F. Ball have recently reformulated B95 and it now uses an enhanced blend of polymers, which has further improved its performance.


www.f-ball.co.uk


twitter.com/TContractFloors


FEATURE | 31


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60