The ultimate Fast Trac or Contaminated Floo
I
f you’re faced with a damp or contaminated fl oor it could delay occupation of the building,
create frustration with the client and of course be costly.
Fortunately there is a solution - specify one of the F. Ball range of market leading Stopgap Waterproof Surface Membranes.
This range of high performance products are designed to solve problems, eliminate the risk of a failed installation and guarantee peace of mind.
Stopgap F76 - a solvent free, one coat waterproof surface membrane
designed for subfl oors with up to 92% Relative Humidity (RH)
Stopgap F78 – a solvent free, one component system which impedes the passage of construction moisture where
relative humidity levels are up to 95% RH with a two coat application. Pigmented blue for easy application F78 is environmentally friendly and ready to use with no mixing necessary and can be resealed and stored for future use. If applied within 12 hours no priming is required when used with the appropriate Stopgap smoothing underlayment.
Isolator
Membrane – an impervious loose lay
sheet designed to be laid over damp or contaminated subfl oors. Available in 2 metre wide rolls Stopgap Isolator Membrane provides the perfect solution in any
construction or refurb scenario where damp or contaminated
Don’t allow subfl oor moisture or c fl oors to delay occupation
Stopgap F77 – a solvent free, one coat application epoxy system which impedes the passage of construction
moisture and rising damp up to 98% RH. Pigmented black for easy application, Stopgap F77 can also be applied directly over underfl oor heating where readings are up to 90% RH.
fl oors are an issue. Trusted by leading fl ooring contractors the F. Ball range of products is guaranteed to perform in all types of problem fl oor situations.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60