Machine inspections are carried out
by Volvo CE personnel who fully check over each machine and then generate a works order for any repairs that are required. Any mechanical repairs are carried out on-site by Volvo CE engineers before the machine then moves through the process for any cosmetic repairs and valeting.
A specially commissioned paint
oven with the very latest Symac robot drying system takes pride of place in the workshop and has been designed to be large enough to accommodate a 70 tonne excavator. Machines are fully masked before spraying to ensure the best possible paint finish takes place and once a machine has been sprayed, heated panels move over the machine to speed up the drying process. Because of this facility it takes only 3-4 hours per colour to re-spray and so it’s sometimes possible to completely re-spray a machine in one day if required.
Carefully selected machines, meticulously inspected and refurbished for a full life.
Before
AFTER
An L220G masked and primed for a bucket re-spray 44 THE VOICE MAGAZINE No26 2016
The re-spray is complete and the team remove the masking
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72