PRODUCTS & EQUIPMENT 3A stainless steel coupling housing
connector series for use in harsh environments Harting has added a Han® 3A
H
stainless steel coupling housing to its Han-INOX® connector series, featuring premium non- rusting stainless steel which makes it ideally suited for applications involving corrosive fluids.
Designed for use outdoors
and in the harsh industrial environments found in the food and process industries, the Han-INOX® series is based on a modular design where the basic housing is combined with
arting adds Han® 3A stainless steel coupling housing to Han-INOX®
an extensive range of contacts covering applications from energy supply to data transfer.
Han-INOX® connectors are available in two sizes. The smaller Han® 3A version can be used for
carrying both high currents - up to 40 A at 690 V - and sensitive data signals for Ethernet communications, for example. Even high-density contact inserts with 21 contacts are available for the small version of the Han- INOX® product. The larger Han® 10B version allows the use of both standard contact inserts with up to 42 contacts and modules from HARTING’s Han-Modular® system, currently comprising over 50 different modules and covering virtually all common industrial requirements. This means that combined connections can be made involving power, data, signals and/or compressed air.
Type 27 Blending Wheel: Finish Fillet welds the right way, every time
Instead, a fillet weld should be reshaped into a radius through blending.
F
Rex-Cut’s Type 27 Blending Wheel, which is designed for controlled blending, helps fabricators blend fillet welds quickly while keeping the integrity of the weld intact.
This versatile wheel is easily shaped into a curved edge, giving the user the ability to create a true radius shape every time. This entire disc is constructed of specialty cotton fiber abrasive material, allowing the user to grind with the face, edge, and top of the wheel. This feature allows for easy and even radius blending.
For tight spaces where right angle grinders can’t reach, Rex-Cut manufactures mounted points with the same abrasive material as the Type 27 Blending Wheels. These
www.internationalmetaltube.com
illet welds are structural, so it’s important not to remove too much of the weld when finishing.
points can blend inside corners of handrails and tubing, door handles, decorative metalwork, and more. Available in 4-1/2”, 5”, and 7”
sizes, with A36 and A54 grit, Rex- Cut Type 27 Cotton Fiber Blending Wheels provide the control needed for fillet blending.
Visit
rexcut.com/t27blending for more information. Rex-Cut Abrasives –
www.rexcut. com
About Rex-Cut
Rex-Cut Abrasives provides the Metalworking industry with high performance, non-woven cotton fiber and other premium abrasive products, offering time saving solutions to a worldwide customer network. The company is the oldest and primary manufacturer of cotton fiber abrasive grinding and finishing products in the world. Rex-Cut products are specialized for use on Stainless Steel, Aluminum, Mild Steel, and Exotic Metals. A 100% employee-owned organization, Rex-Cut offers many other specialty products for use on a variety of grinding, deburring, blending, and finishing applications.
For more information, contact: Kate Reilly 508-678-1985 x156 e:
kater@rexcut.com
IMT September 2016 25
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40