This page contains a Flash digital edition of a book.
PRODUCTS & EQUIPMENT Fit for the future: Demag Service


New crane bridge with high loading group classification • Crane control system: Category 3, performance level d to DIN 13849-1 • Synchronised control minimises mechanical wear going forward


D


emag Service will modernise four crane installations operated by IMPERIAL Logistics


International with a comprehensive package of measures. The specialist for transport and supply chain solutions has awarded a contract for the refurbishment of four pro- cess cranes, which have served a steel coil store at its location in Bochum, Germany, for 16 years. Besides the replacement of the crane bridges and the installation


of a new crane control system, the forthcoming modernisation project will also include imple- mentation of synchronised control for the long-travel motion. In addition, IMPERIAL Logistics International has placed an order for the refurbishment of the entire crane runway.


Store served by four cranes The four identical process cranes entered service at the location in Bochum in 1999. Besides storing


steel coils that are delivered to them by a shuttle, the cranes, which operate on two parallel runways, ensure that coils are staged in time for further transport by truck or rail. The double-girder overhead travelling cranes, which are manually controlled from a cab, have a load capacity of 36 tonnes. The four cranes handle some 2.7 million tonnes of steel every year. Following a detailed review by the Demag modernisation experts, a package of measures was


defined for the crane installations: • Replacement of the 35 m-long crane bridges, which are rated for a higher loading group classification (H3 B5)


• Replacement of the end carriages with corner-bearing end carriages and frequency inverter-fed drives • Installation of complete new crane electric equipment including the control system, which now meets the requirements of Performance Level d and Safety Category 3 to DIN 13849-1.


12


IMT September 2016


www.internationalmetaltube.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40