PRODUCTS & EQUIPMENT STEELMASTER SOFTWARE STEELMASTER SOFTWARE
Basic Software Package The basic package features all functions for round products:
• Display of mean value, min., max., ovality • Hot and / or cold values
• Head and tail scrap length indication
• Start and end suppression • Calculation of diameters, height, width, diagonals • Display of mean value, min., max., ovality • Hot and / or cold values • Min. /max. alarms • Head and tail scrap length indication • Personalized screens • Statistics, printed reports • Optional software extensions • 10 major languages; others on request • Section, trend screens • Split screens (MULTIGAUGE) • Configuration, calibration screens
Optional Software Packages Besides the basic package, STEELMASTER systems offer many additional modules and extensions such as:
• STEELDATA Data filtering, pre-processing, computation
• STEELGAUGE System configuration (1...4 gauges)
• PROFILES For squares, hexagons, flats, special profiles
• REBAR For rebar with various geometries
• SPC For SPC statistics, configurable
• STEELHOST Standard protocol for ETHERNET TCP/IP
• STEELDATABASE For post production viewing and archiving (to be installed on external PC's)
• REMOTE STEELMASTER For networking via ETHERNET TCP/IP, with up to 10 independent PC workstations
EPM and FPS method and software (with 3 axes only). ZUMBACH's EPM and FPS algorithms and software (pat. pend.) solve many problems.
• POLYGON / EPM / FPS EPM and FPS method and software (with 3 axes only). ZUMBACH's EPM and FPS algorithms and software (pat. pend.) solve many problems.
EPM (Enhanced Profile Measurement) can measure and calculate non-symmetrics polygonal or any irregular product. The screen presents the product in an almost 1:1 real shape on the operator screen. The effective roundness RONt (by ISO definition) gets calculated for any deviation from round.
EPM (Enhanced Profile Measurement) can measure and calculate non-symmetrics polygonal or any irregular product. The screen presents the product in an almost 1:1 real shape on the operator screen. The effective roundness RONt (by ISO definition) gets calculated for any deviation from round.
FPS (Full Profile Synthesis) is an optional module, especially important for round or hexagonal bars rolled in 3-roll blocks. It provides 2-point and 3-point diameter values and in particular the DT and GT values which are essential for quick setting of 3-roll blocks.
5 5
FPS (Full Profile Synthesis) is an optional module, especially important for round or hexagonal bars rolled in 3-roll blocks. It provides 2-point and 3-point diameter values and in particular the DT and GT values which are essential for quick setting of 3-roll blocks.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40