METALLICS I MACHINING
Indeed, in certain applications a spindle probe can be used to determine the part datum and the control will automatically apply any offsets for 5-axis working. When compared with other 5-axis machine tool/control
combinations, ADFO overcomes the general problem where the orbiting points of both B- and C-rotary axes have to be taken into account to achieve or maintain the accuracy of form while maintaining high orders of surface finish.
Reduced fixturing costs In normal machining without ADFO, users will probably have to utilise more elaborate fixturing for workholding and the operator has to be relied upon to always remember to set new parts back to their respective centre positions. As a result, this has a direct reflection on the cost and quality of fixturing, the time involved in datum alignment and most importantly the overall geometric relationship of the part to its programmed centre points. The HU 63-T machine is part of a new series of 5-axis machining centres with capacities from the HU40-T with
The combination of the 5-axis Mitsui Seiki HU63-T’s new machine design and ADFO software targets the aerospace sector
610mm in X and 560mm in Y and Z to the HU100-T which has
1,300mm in X and 1,000mm in Y and Z. ❙
www.2dcnc.co.uk
Future concepts in aircraft coating in terms of design, production, operation and maintenance
15 – 16 May 2013 | Lisbon, Portugal
Guided tour at TAP Maintenance & Engineering Exclusive
www.intaircoat.com
IntAIRCOAT Night sponsored by:
Official carrier of this event:
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48