FEATURE MAINTENANCE MANAGEMENT
SELECTING THE RIGHT GREASE for high temperature operations
Choosing the right grease can play an essential role in helping to protect equipment and ensure trouble-free operation, says Mohamed Mourad of ExxonMobil Lubricants & Specialities
S
teel mills, food manufacturing facilities and pulp and paper plants
are well known for their high- temperature operating environments that require lubricants including greases that are specifically designed to ensure consistent performance and longevity in such conditions. Choosing the right grease can play an essential role in helping to protect equipment and ensuring a trouble-free operation. However, in selecting a grease which will help to maximise equipment protection and increase productivity it is vital to not only consider the quality and performance of a product but the requirements and challenges of the specific application. Operations that function at extreme
temperatures and under intense pressure pose lubrication challenges which can only be met by technology that is specifically designed to meet such requirements. Factors including base oil type, viscosity, thickener type, stability of the composition and operating temperature must all be considered in order to ensure that the most appropriate grease is selected.
GREASE FORMULATION It is important for maintenance professionals to understand how greases are formulated in order to ensure that they select one which will deliver the performance required to protect their equipment in the long term. Think of grease like a sponge soaked
with lubricating oil. Upon application of external stresses such as heavy loads or high temperatures the thickener (sponge) releases the oil to lubricate the mechanical parts. When the stress is removed the thickener re-absorbs a portion of the released oil for later use. Typically, greases are applied to mechanisms in which a lubricant cannot stay in position or relubrication is infrequent, difficult or not economical including drive shaft couplings, universal joints and fan shaft bearings.
HIGH TEMPERATURE OPERATIONS In extreme temperature applications there is a risk that a grease will perform poorly due to degradation resulting from
10 SEPTEMBER 2015 | FACTORY EQUIPMENT
compared to competitor mineral oils. This carefully balanced combination of thickener, base oils and additives yields a grease with excellent load carrying capabilities and rust protection.
thickener and base oil oxidation or due to the loss of base oil from grease bleed and evaporation. One of the driving factors that can limit the ability of a grease to provide lubrication at higher temperatures is proper viscosity and oxidative resistance. Oxidation is a chemical reaction that occurs between oxygen and the in-service lubricant and is accelerated in high temperatures. A grease’s oxidation rate generally doubles with every 15°C rise in temperature above 60°C. This rule-of- thumb varies, based on the type of thickener used in the grease and for soap thickeners the amount of metal contained in the structure (lithium, calcium, aluminium, etc). Typically, greases with synthetic base
oils can provide a wider operating temperature range than conventional, mineral-based greases. For example, the Mobil SHC Polyrex Series is a range of high performance, synthetic bearing greases that uses advanced polyurea thickener technology in order to achieve excellent high temperature performance up to 170°C. Even at these extreme temperatures the polyurea thickener technology resists oxidation and loss of structural stability allowing relubrication intervals to be extended while maintaining equipment protection when
Typically, greases are applied to mechanisms in which a lubricant cannot stay in position or relubrication is infrequent, difficult or not economical including drive shaft couplings, universal joints and fan shaft bearings
It is important for maintenance professionals to understand how greases are formulated in order to ensure that they select one which will deliver the performance required to protect their equipment in the long term
BOOSTING PRODUCTIVITY WITH SYNTHETICS One company to benefit from the use of advanced greases in a high temperature environment is an aluminium plant in Germany. To protect wheel bearings the plant had been using a grease with a base oil viscosity of 100cSt and experiencing routine bearing failures and significant mechanical wear and tear due to lubricant degradation as a result of excessive heat. In addition, the plant was incurring high lubricant costs. A team of ExxonMobil technical experts
were asked by the plant’s maintenance team to help provide a comprehensive analysis of the plant’s operations and equipment maintenance practices to help address the issues. Following the audit the team made specific recommendations to convert the lubricant protecting the wheel bearings to Mobil SHC Polyrex 462 in addition to implementing a best practice programme to help increase re-greasing intervals. The higher base oil viscosity provided the machinery with improved levels of protection, resulting in a noticeable reduction in component damage, an overall improvement in performance and an annual saving of €39,000. This Proof of Performance is based on the experience of a single customer. Actual results can vary depending upon the type of equipment used and its maintenance, operating conditions and environment and any prior lubricant used. With ongoing developments in
machinery to increase output and the high ambient temperatures of many industrial sectors, lubricants that can operate effectively in extreme conditions will enable companies to build a competitive advantage into their operations by reducing downtime and increasing productivity.
ExxonMobil Lubricants T: +420 221 456 426
www.mobilindustrial.com
/ FACTORYEQUIPMENT
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56