FEATURE COVER STORY
THE CONNECTED CAR: Driven by information
Steven Keeping, for Mouser Electronics discusses how connectivity is infiltrating the automotive space, turning the car into a live-feed information hub
I
n recent years, in-car systems have been supplemented by basic Internet
connectivity, allowing drivers and passengers to remain “plugged in” to the business and social networks they take for granted when at home or in the office. But what if connectivity could be taken a stage further? What if the most modest sensor or even the engine management unit could send and receive information without the involvement of the driver? With pervasive connectivity, powerful new features are emerging that will not only change the driving experience, but will dramatically change the entire automotive ecosystem. This vehicle already has a name: The “connected car.” It has been estimated that by 2017 more
than 60% of the world’s vehicles will be connected and monitoring the safety and security of vehicles and occupants. By then, all new cars are expected to have built-in technology that will allow them to automatically call emergency services if the worst happens. The vehicle will have the intelligence to provide its location to emergency services as well as convey vital information. Of course, one of the primary goals of the connected car is to avoid dangerous situations in the first place. In a recent 15-month study of 2,800
vehicles equipped with a swarm of sensors monitoring everything from road condition, distance to the vehicle in front, vehicle speed and acceleration, and location (via GPS) together with wireless vehicle-to- vehicle communications technology, around 400 vehicles recorded a warning of an impending crash that was avoided. The ability to monitor other vehicles and provide this type of feedback to the driver goes far beyond the familiar back-up camera or vehicle blind-spot sensor. Though not directly related to actual
driving, another potentially huge benefit that will come from the connected automobile is related to insurance. Today, automobile insurance companies base their premiums on demographics – a driver’s age, gender, home location, and driving history all factor into the amount paid for insurance. Using uploaded data from on- board vehicle telematics systems (the collective term for the network of sensors
12 FEBRUARY 2015 | ELECTRONICS
Electronic control units (ECUs)– modules that control everything from dashboard instruments to safety features and powertrain components to in-vehicle infotainment (IVI) systems– use wired Controller Area Network (CAN) or Local Interconnect Network (LIN) buses. However, the number of these devices in the average car has steadily increased in the past ten years, and many vehicles now incorporate more than 200 separate ECUs. Changes to this conventional layout in an
IoT-enabled vehicle are likely to include the use of high speed Ethernet to link the various systems, replacing older, slower CAN and LIN buses and the introduction of mini-hubs to aggregate groups of sensors or ECUs that will allow communication to servers in the cloud directly. Wireless connectivity such as Bluetooth
and processors), insurers will soon be able to match premiums with true risk based upon measured variables such as driving location and actual driving behaviour. Similar data will also be gathered by municipalities and used to assess taxes and fees rather than using the fuel excise tax of today. The European Union (EU) has taken a
leading role in moving the connected car from concept to reality. Earlier this year the EU announced that two European standards organisations, European Telecommunication Standard Institute (ETSI) and the European Committee for Standardisation (Comité Européen de Normalisation or CEN) confirmed that the basic set of standards to make connected cars a reality has been fully completed. These standards ensure that vehicles made by different manufacturers will be able to communicate with each other. Though a modern car already contains
networks formed from wired and wireless elements, much of that technology will need to be adapted and upgraded to suit connection to the Internet of Things.
Figure 1: Inside the connected car
technology or Wi-Fi is typically used to connect smartphones and tablets to the vehicle’s dash-mounted HMI. Everything will still connect back to a central-vehicle gateway that will retain the on-board diagnostics data link connector (OBD DLC), but vehicles will also incorporate a telemetry module to look after the wireless connectivity to the Internet. A good way to consider a vehicle’s IoT connectivity is to consider the car as a large hub to which all the systems and subsystems of the vehicle link in order to send and receive information to the wider network. Electronics manufacturers have long
considered the automotive segment as a top priority and are making IoT technology available through a variety of components, evaluation kits, and software. But it’s early days for the technology and automotive- grade components are thin on the ground. In order to fully unlock this potential, a
wide range of barriers need to be addressed, including security, safety, regulation, and privacy. So while the future for the connected car is undoubtedly bright, the highway to its success is covered with speed bumps.
Mouser Electronics
mouser.com 01494 467 490
Enter 201 / ELECTRONICS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48