PRODUCTS RACKS, CABINETS & ENCLOSURES AUTOMATION IN ENCLOSURE ASSEMBLY
developed for wiring enclosure mounting plates. The system cuts the wires to the correct length before stripping and crimping with wire ferrules, feeding the wires through the cable duct and attaching them to
iesling Maschinentechnik, a member of the internationally successful Friedhelm Loh Group, is a specialist of automation solutions in switchgear manufacture. Following a five-year development period, the Averex, one of the world’s first robotic wiring centres is now production-ready. But first, two real- world field tests will be conducted in the second half of 2014. Averex has been specially
R
components such as terminal blocks, contactors and motor circuit breakers. On average it takes around 180 seconds to complete this wiring process manually but Averex finishes the same task in approximately 40 seconds. Exceptionally reliable, Averex uses lasers to identify parts and check their dimensions against the assembly tolerances. Automation
reduces the number of required working hours by approximately 15 per enclosure compared to manual wiring (based on 300 wires). Control software, with routing
module, is particularly simple to use, featuring an intuitive graphics-based operator interface and can be integrated conveniently with electronic wiring lists and CAD layout tools.
The solution’s stand-out
technical feature is its patented machine head, which can be rotated by 270 degrees and includes cable routing, cutting, stripping and crimping units, torque-controlled screwing and, pre-punched holes are provided in the reinforcing plate. Rittal
www.rittal.com
STAINLESS STEEL ENCLOSURES
A new range of stainless steel electronic enclosures has been released by Rolec. The company's inoCASE and inoCASEmini are rated IP 66 as standard for demanding industrial environments such as marine and offshore, and manufacturing. They are available direct from stock
DESIGN YOUR OWN ENCLOSURE ONLINE
A bespoke production-ready fully configured IP67 outdoor electronic system box can now be designed in minutes online and delivered in days. This removes the need to re-engineer an off-the-shelf enclosure and source and integrate components such as power, data communications and monitoring from multiple suppliers - only to find they don't work in practice. GTT's msmart-box is designed with a simple-to-use on-line tool that creates a fully integrated product ready for use. This speedy solution means accelerated market entry, beating the competition, development cost-savings, and a product that will not be discontinued and can be further developed to service evolving applications. The new msmart-box is EN60950-22 approved and features a robust, anti-corrosive frame that is vibration & shock tested. GTT Europe
www.gtteurope.co.uk
with no minimum order quantity and can be specified with CNC laser-cut holes and cutouts for controls and cable glands. Electropolishing is also available to give an extremely high quality corrosion-resistant finish. These new cases are manufactured
from 4301/V2A/AISI 304 stainless steel. Smart design features common to both include a single channel for fixing the lid and mounting the enclosure. This design means the enclosures can
be securely mounted to walls, bulkheads or machines without having to drill through the base – preserving the integrity of the electronics compartment and also saving space.
Rolec
www.rolec-enclosures.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56