NEW PRODUCTS
EXTECH’s 4000G Unit Glass Skylight is
PMC Industries clamp saves time and effort The AceClamp ML is a standing seam metal roof clamp system that can accommodate almost any application or roof seam design. Its two-piece design allows installation at any point on the seam with one of the tightest vibration- tested grips in the industry, while not puncturing or scratching the roof’s surface. Designed especially with the contractor in mind, is an easy, quick and safe way to install attachment clamps on standing seam metal roofs. The patented clamp is engi- neered with one top mounting screw, reportedly completing installation in less than half the time of conventional side-mounting systems.
www.pmcind.com
| Circle #60
capable of being installed on a fl at roof Skylight’s low profi le (silicone sealed) perim- eter allows water to freely run off. Its super strong curb design allows for large skylights up to 32 square feet. Additional benefi ts include aluminum fl ange to protect glass edge, foam cush- ions to provide thermal isolation, strategically placed weep holes and weep slot aligning with weep holes. Silicone structural bead/Isolator and silicone water- proofi ng bead ensure a leak tight seal.
www.extechinc.com
| Circle #62
Airolite offers new vertical
blade Storm Class Louver New Airolite Storm Class Louver Type SCV501 is a wind-driven rain louver designed to protect air intake and exhaust openings in building exterior walls from direct water penetration even in the most extreme weather conditions. AMCA licensed for water penetra- tion, air performance and wind-driven rain, its design incorporates a drainable head member and 5-inch-deep vertical rain resistant blades. Louvers featuring vertical blades reportedly offer the best protection against wind-driven rain and the vertical blade offers a distinct look to a building’s facade.
www.airolite.com
| Circle #64
Wausau’s interior S.E.A.L. windows simplify
Rmax introduces R-TRAC HVHZ from Altech
Panel Systems R-TRAC HVHZ is a Pressure Equalized Rain- screen (PER) featuring Rmax ECOMAXci polyi- socyanurate (polyiso) insulation and ALPOLIC composite material that meets new continu- ous insulation requirements with approval for all coastal regions. The new offering has Florida Building Code Approval (#FL16406), meets TAS 201, 202 and 203 up to 200 mph (ASTM E1886 and E1996), and has High Velocity Hurricane Zone (HVHZ) approval with a dry seal, which means there’s no caulk in the joints to wear out.
www.rmax.com
| Circle #61
www.metalconstructionnews.com
upgrades for sound, energy, air and light Wausau Window and Wall Systems’ “Sound, Energy, Air and Light” S.E.A.L. Series upgrades the acoustical and thermal performance of facilities’ existing window systems. Installation can be accomplished from inside the building, mini- mizing disruption to occupants, regardless of the season. These standard interior accessory windows (IAWs) are ideally suited to meet the accelerated pace of construction timelines for low- and mid-rise buildings including offi ces, schools and medical facilities. Leaving the exterior window or curtain- wall framing systems intact, they can contribute to improved energy effi ciency and other demanding performance needs. For facilities in high-traffi c areas near highways, railways or airports, S.E.A.L. windows also are an excellent choice for reducing sound transmittance. These benefi ts, along with daylight and outside views, are recognized by the LEED Green Building Rating Systems.
www.wausauwindow.com
| Circle #63
Kelley HULK Series Zero Lift provides a level
interface for ground level loading The HULK Series Zero Lift is designed to lift palleted materials from ground level to an ergonomic working height without a fork lift or other heavy equipment. The lift lowers to ground level for easy loading of wheeled carts or pallets with just a pallet jack, and provides users with a cost-effective and ergonomic solution to increase safety and overall operational effi ciency. Available in 2,000- to 4,000- pound capacities, this fully powered unit provides consistently reliable operation thanks to the self-lubricating bushings with hardened chrome pins for pivot points.
www.kelley.4frontes.com
| Circle #65 December 2013 METAL CONSTRUCTION NEWS 59
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68