This page contains a Flash digital edition of a book.
SPECIAL FEATURE Metal Construction News Building & Roofi ng Awards Judges Award: Olathe Adult Detention Center


Olathe Adult Detention Center, Olathe, Kan.


RenoA Contemporaryvation By Marcy Marro, Editor Photography By: Gilbertson Photography Detention center receives new highly effi cient envelope


Serving 18 outlying municipalities and county and state law enforcement agencies in Kansas, the existing Olathe Adult De- tention Center in Olathe, Kan., underwent a renovation to improve and expand the facility as a new hub for centralized intake and booking. Improvements included the complete re-cladding of the building’s exte- rior envelope to replace the existing failing brick-and-stone masonry enclosure, along with a major mechanical systems upgrade. Additionally, a new 31,780-square-foot addition expands the fi rst fl oor to house in- take processing, booking, holding, support services, administration functions, and a new sally port structure. Designed for LEED Silver standards, the renova-


tion included removing and replacing the building’s existing façade to improve energy effi ciency and the building envelope’s overall performance. “By removing the failing brick and creating a new energy- effi cient and sustainable building skin, the building served to revitalize the downtown area and set a contemporary direction for the community and the design of future county facilities,” notes Jeffrey T.


28 METAL CONSTRUCTION NEWS December 2013


Lane, AIA, architect at Treanor Architects, Topeka, Kan., the architect of record. The design team of Treanor Architects and


BNIM Architects, Kansas City, Mo., sought solu- tions for the Olathe facilities failing envelope. “The re-cladding effort was to cover the tower which contains the existing holding cells in a ‘veil’ of perforated zinc metal rainscreen enclosure, still allowing daylight to penetrate and views outward to remain, yet eliminating the unwanted pedes- trian views inward, all while cooling the façade,” says Doug Stevens, principal with BNIM. “Panels of the rainscreen change in openness by perfora- tion size to address day room areas from holding cells and the building drastically changes at night as interior lighting illuminates through the skin. Zinc became an integral part of the new, high- performance enclosure, one of low maintenance/ long life span of 50-100 years, but also a design yielding new civic presence.” The project utilized 40,000 square feet of a


1-mm custom panel made with QUARTZ-ZINC from Umicore Building Products USA Inc., Raleigh, N.C., as the new cladding for the façade and roof. By using zinc panels, the detention center now has a


durable surface able to withstand the elements for decades while providing an aesthetically pleasing, clean, modern look that makes it appear different from what most people typically associate with this type of facility. Once the original brick façade was removed, the


zinc wall panels were installed around the existing four-story building. Ben Vanderau, LEED AP, project manager with the construction manager at risk, JE Dunn, Topeka, notes that since the existing structure was not plumb and square, modifi cations were made to the zinc panel framing system to allow for varia- tions in the existing structure. “The building skin solution was a lightweight


zinc perforated metal panel that allowed room away from the uneven existing concrete substrate to install a spray foam insulation to an R-21 value, creating a highly effi cient envelope,” explains Lane. “By varying the perforation pattern, the cell windows could be screened to allow light without a distinguishable feature on the exterior. This elimi- nated the need for frosting the window to control views into inmates and restrict the communication issues with restricting the inmate natural light and their views to the outside.”


www.metalconstructionnews.com


Completed: January 2012 Total square footage: 161,000 square feet Building owner: Johnson County Public Building Commission Architect of record: Treanor Architects PA, Topeka, Kan. Architect: BNIM, Kansas City, Mo. Construction manager at risk: JE Dunn, Topeka Metal installer: A2MG Architectural Metal & Glass, Kansas City Metal wall panels: Umicore Building Products USA Inc., Raleigh, N.C., www.vmzinc-us.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68