EXPAND YOUR BUSINESS The Importance of Roof Walk Systems A safe, anti-skid surface for access on metal roofs
Roof walk systems are a highly over- looked rooftop product that needs to be discussed more frequently during project planning. Educating the building owner of a product that can prevent damage to their metal roof investment is in the interest of all involved parties. The architect/specifi er can include roof walks on the initial bid documents/drawings, the metal roof panel/building company can recom- mend roof walks under their warranty packages, or the roofi ng contractor can quote roof walks as an add during the bid process. Design-build projects have a greater potential of having a roof walk system included on the project since the contractor and the building owner already have a close working relationship, and the benefi ts can be explained directly. Anyone who requires roof access to per-
form periodic maintenance on rooftop-mounted air conditioning units, exhaust fans or any other equipment (satellite dishes, vents, chimneys, etc.) can safely walk on the anti-skid walkway system without fear of accidentally compromising/damag- ing standing seams or panel ribs. Personnel also have a level of comfort knowing that they are walking on a solid and stable surface, and are able to maintain a sure footing in lieu of walking on a
slippery roof due to inclement weather or even the morning dew early in the mornings. Walkway systems can have a pre-deter-
mined layout that guides workers on a path (perpendicular, parallel, and even diagonally to the roof seams) on the building that should keep them away from the edge of the building. How- ever, if the walkway is required to be located near the roof’s edge, the addition of a handrail will assist in OSHA regulations. Handrails can be installed to either the down slope side, or to both sides of the walkways and not just at the roof’s edge. Walkways can be leveled on steeper roof slopes. However, this will result in an unsafe condition with an elevated walkway that the addition of handrail will be required to the down slope side. Additionally, platforms around access ladders, roof hatches and rooftop products are helpful in safely staging tools or equipment that need to be brought onto the roof.
Walkway details Interlocking grating supplied in 12-inch widths and 20- or 24-foot lengths are designed to simplify in- stallation and reduce the cost of roof walk systems and platforms. An anti-skid surface is the only op- tion that should be chosen for rooftop applications.
The grating is also slotted, allowing water, light, de- bris and air to pass through. Its height strength-to- weight ratio—18 gauges, 2 1 /2-inch leg height— makes it ideal for covering large, light-traffi c areas. Its snap-together friction fi t makes it easy to install with no welding or bolting required. Made of pre-galvanized steel or aluminum
fi nish, walkways are maintenance-free and long lasting. The anti-skid surface meets a wide variety of application needs. When attaching to standing seam roof panels, the attachment method is just as important as the grating. A non-penetrating clamp for securing the roof walks to the panel seams should be the only attachment method used. This ensures the metal roof’s integrity is not compromised. Attaching to “R” panel roofs is achieved with support plates, neoprene washer head/self-tapping screws, and sealant tape ap- plied under each support plate. Attachment points to the high ribs of the “R” panel roof help ensure a watertight installation.
Clint Funderburk has been involved in the metal building industry for more than 19 years and is vice president of marketing for Longview, Texas-based LMCurbs. Visit
www.lmcurbs.com or call (800) 284-1412 for more information.
By Clint Funderburk
With a roof walk system, personnel have a level of comfort knowing that they are walking on a solid and stable surface, and are able to maintain a sure footing.
Walkway systems can have a pre-determined layout that guides workers on a path (perpendicular, parallel, and even diagonally to the roof seams) on the building that should keep them away from the edge of the building.
38 METAL CONSTRUCTION NEWS December 2013
www.metalconstructionnews.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68