DHD
52/RX. Solid hardware with full features.
also mount the 52/MX modules in rack or table top cases, and of course use TFT Touch Displays where necessary. However, the real power comes
52/RX – MODULAR CONSOLE
The modular 52/RX allows you to build consoles with up to 64 channels. Its fader modules are four faders wide and are available in different versions, including some with motor faders. Combine the fader modules of your choice with the central control module and TFT Touch Displays and you get a solid hardware base for your studio. If necessary, you can also integrate modules from the 52/MX system to build special talkback or control solutions.
The 52/RX is easy to integrate with other
Series 52 devices. This works very well, because all systems are based on the same hardware platform and share the same software. That way, you can configure them within the same Toolbox 5 project. The 52/RX control modules are connected to the core modules with standard Cat5 cables and use power over Ethernet for their power supply. This makes it easy to use an existing cabling infrastructure.
52/MX – FULLY FLEXIBLE CONSOLE
The 52/MX is the flagship console of the Series 52. Its design is fully modular – there are many specialised module ‘strips’ available. To build a studio, you choose the matching modules for your application. No matter if you need a small talkback box with a few buttons or a ‘big’ console with lots of faders, buttons, and TFT Touch Displays as fader over bridge – all modules will work smoothly together. There are many different mounting options available. You can
with the Toolbox configuration software. With this Windows application, you configure your DHD system exactly the way you want it. Signal flows, audio processing, control functions, GPIO functions, TFT views, and many things more are entirely defined in software. The initial set-up is easy, and future changes are often done
with a few mouse clicks. All 52/MX modules are connected with
power over Ethernet on standard Cat5 cabling, enabling you to place them anywhere in your studio set-up.
52/DX – SMALL FOOTPRINT DESKTOP MIXER
The 52/DX can be used as a full, stand-alone four-fader mixer. It consists of the Desktop Control Unit, and both the XS DSP Core and the XS Multi I/O Module mounted together in a 1U rack case. This hardware bundle also includes the easy to use set-up software ‘DXConfig’. The optional DHD products ‘DSP Control Software’ and ‘Remote Control PC Software’ work with the 52/DX, too.
52/DX. Small footprint.
Still, together with console modules, they provide audio and control processing for any mixer set- up – from a small 52/DX Desktop Mixer up to a large 32 fader 52/MX console. However, you can also use them stand-alone
as routing matrix or processing devices. If used as an audio router, the core modules are not only able to switch audio signals, but can also fade and even apply DSP processing – like gain, EQ, or dynamics. The integrated control functions allow you to create complex On-Air switching systems or talkback applications. For direct control, combine the 52/XC or 52/XD Cores with a great variety of DHD control modules, including fader modules, router control panels, and TFT Touch Displays. All control modules and TFT Touch Displays use standard CAT cables for communication with the cores.
52/XC DANTE™ IP AUDIO INTERFACE
This audio interface connects DHD devices to digital audio networks powered by Audinate’s Dante™ technology. It supports up to 48 input and 48 output channels. These audio streams can be distributed over standard IT networks to other Dante compliant nodes in software (PC and Mac) and hardware, like other DHD Dante interfaces or third-party hardware. Dante technology enables monitoring,
talkback and connection of remote facilities to the studio. For redundancy, Dante devices provide
two separate network interfaces. These allow you to easily create error-tolerant set-ups.
However, if you want to integrate the 52/DX with other Series 52 set-ups or use Core and I/O modules from other DHD product lines, there is an upgrade available. This software license enables enhanced custom configuration of the 52/DX hardware with the ‘Toolbox5’ software used with the 52/MX system.
52/XC AND 52/XD CORE – MIXING AND ROUTING MADE EASY
52/MX. Fits your workflow.
www.audiomedia.com
These core modules contain the processing power for all Series 52 devices. They have a small footprint (1U) and low power consumption.
INFORMATION
DHD Deubner Hoffmann Digital GmbH Haferkornstr. 5 04129 Leipzig, Germany
Phone: +49 341 5897020 Fax: +49 341 5897022 Email:
dhd@dhd-audio.com
Please find our international sales contacts at
www.dhd-audio.com
November 2013 25
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96