Feature Materials Handling & Conveying


Picking without slipping O


Regatta, the outdoor clothing and footwear brand, has had 2,000 bays of specially designed shelving from BITO Storage Systems installed to ease the process of picking individual polythene wrapped garments and footwear


n the back of continued growth, Regatta took the deci- sion to install new storage equipment into a larger premises. It found the ideal 400,000ft2 distribution centre at Pioneer Point, Ellesmere Port and moved in during September 2011, ready for the fit out. A vital part in such a vast opera- tion is to optimise the order picking locations and to that end, Regatta had two key requirements. Firstly, the shelving, which would be integrated within the ground level bays of the wide aisle pallet racking system installed by Link 51, needed to allow effective sprinkler operation in the event of a fire, thus meeting the approval of Regatta’s insurers. The second goal was to retain stacks of polythene wrapped garments in a way that would make it easy to pick an individual garment from the top of the pile, without causing those below to slide out of the shelf and onto the floor. Whenever a pile of such products gets to about ten high, it starts to arc making it easier for garments to slip out. Regatta had previously used bespoke, wire mesh baskets of about 500mm2


x 800mm2 to hold its stock for


picking. While suiting its smaller warehouse operation, providing these baskets for 2,000 locations in the new DC would be both costly and impracti- cal and so, with an outline design of what was required, the retailer turned to BITO Storage Systems to provide a new solution that would turn its con- cept into a successful reality.


Picking a winning solution Within eight weeks of receiving Regatta’s enquiry, BITO provided four prototype designs for a flexible, multi- ple product picking unit, based on its galvanised shelving system. This even- tually resulted in an order and the system became operational in November 2011.


Each module of BITO’s solution is configured with four levels of 1,300mm wide x 1,800mm deep shelves. The module’s width means that two of these units fit snugly between the uprights of a typical 2.7m wide pallet rack bay.


The 1,300mm wide shelf is split into two locations by a divider, which has a


Automation SEPTEMBER 2013


75mm wide vertical return on one side at the pick face. Together with a corre- sponding 75mm vertical return running down the face of the module’s solid side wall, this creates a retained location that holds a pile of individual, polythene wrapped garments securely, preventing them from sliding around during pick- ing, while providing a gap that is wide enough to make an easy pick. The location on the other side of the


divider, without any returns, is fully open to access split case picking of stock, which is replenished from the bulk pallets stored in the pallet rack- ing above.


BITO also provided Regatta with variations on this shelving module to suit different product lines. One of these has dividers with double returns to give retained locations in both halves of the 1,300mm shelf. Another version has no retainers at all on the dividers, while a further version, with- out dividers, is used by Regatta to accommodate either 3 x 400mm wide single cartons or three sets of three high 400mm wide picking trays for small items.


A major feature of this project was the extensive involvement from Regatta’s insurers so that the design criteria satisfied their requirements. That means ensuring that, in the event of a fire, the shelving would allow water from a sprinkler system to flow through the shelves. BITO’s solution addresses this thanks to the punched shelving that provides large holes in the top three shelf bases


15


Above: BITO’s shelving system with a single return on the divider to provide a retained position on one side for piles of individual wrapped garments and an open position on the other for split cases


(the ground level base is solid) to allow water from Regatta’s sprinkler system to flow through. Despite the reduced amount of steel from the large perfora- tions and Regatta requiring each shelf in a module to hold 50kg, BITO’s rigid design still gives a 200kg capacity. In fact, during testing the shelves still didn’t sag under a 300kg load.


Below: BITO


provided variations on its shelving including dividers with double returns, versions with no dividers to store pick cartons, and trays


Increased protection To further maximise the effectiveness of the sprinklers, the BITO design actually controls the direction of the fire. The shelving has mesh at the rear and at the side of the module next to the racking upright, but a solid sheet is placed between the two 1,300mm wide modules sitting within a 2.7m wide bay. This solid wall will prevent fire spreading left or right and forms a flue to channel the fire directly to the location of the sprinkler heads to put the fire out as quickly as possible. “We were looking for something unique in terms of shelving, which would afford us the versatility to be able to place multiple products in a location and also to vary the size of locations depending on the product,” said Alistair Wood, general manager - logistics at Regatta Group. “We devised a potential design and then looked for a partner to develop it into a working solution. We invited BITO in and they examined a variety of designs to achieve the optimum height, occu- pancy and flexibility. A trial bay was then built, refining the design through a number of prototypes. BITO’s shelv- ing works harmoniously with the pallet racking, the protective equip- ment, and the sprinklers provided by other suppliers. BITO’s shelving not only meets our criteria but they were able to take our concept and imple- ment the reality within a very short period of time.”


BITO www.bito.co.uk T: 0247 638 8850


Enter 202


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52