Snow Guards for Metal, Slate, Shingle and Membrane Roof Systems!
Sno Barricade Bar Systems
Non-Penetrating Clamps to Standing Seam
Community United Methodist Church, Circleville, Ohio The community rallied together to raise money to fund a solution for the church’s constantly leaking roof. The original shingled roof contained layers of additional shingles that were used as a temporary solution to the leaking problem. After three layers of shingles failed to fi x the leak, a more permanent solution was sought and found in a metal roof. The goal was to provide the church with a
Membrane Bar Systems Deck Mount/ Fastened Bar System Mechanically
high-performance roofi ng solution with guaranteed watertight protection. The constant leaking over the years had damaged some of the structural wood trusses, requiring a complete roof tear-off and subsequent repair of the wood decking. The Garland Co. Inc. provided 10,000 square feet of its 16-inch, 0.040-inch aluminum R-Mer Span stand- ing seam roof panels in Portland Stone.
Due to the various changes in plane on the
church’s roof, many of the tough details had to be fi eld cut on-site to ensure watertight protection. Although the panels varied in length from 62 feet at their longest to 5 feet at their shortest, each was a continuous panel with no laps, providing further watertight protection covered by a 30-year warranty.
General contractor/installer: Kalkreuth Roofi ng and Sheet Metal, Wheeling, W. Va. Metal roof panels: The Garland Co. Inc., Cleveland, www.garlandco.com, Circle #48
Polycarbonate Snow Guards
Application
3M Tape
Snow Guards
Metal
Application
Contact us for the latest in snow retention systems product technology!
Tenryu’s (patent pending) design technology brings you an even more stable, smoother cutting and longer life steel cutting blade. The Steel-Pro STABILIZER blade is so true and flat, that it will consistently deliver superior overall performance.
The Steel-Pro STABILIZER is available in a variety of sizes from 7” blades for portable circular saws to 14” blades for low RPM “dry cut”chop saws. Ask for the Tenryu Steel-Pro STABILIZER blades at your favorite dealer or call 800-951-SAWS for a dealer near you.
Making quality saw blades since 1910
circle #31 on reader service card circle #32 on reader service card