Retro RC Indoor camp e’Racer
Retro RC is pleased to announce their latest profile micro-model kit, the “camp e’Racer” for indoor flying and outdoor when the winds are down. Taking a few styling cues from aviation’s golden years, she has the looks of a thoroughbred racer from the ’20s or ’30s. With ample dihedral, camp e’Racer is stable enough for a beginner to master, while at full throws and throttle firewalled, she will amaze the expert with her agility and aerobatic capability for a three-channel model. This one is a blast to pylon race; get a group together, and have your own “Backyard-Bendix” races! Camp e’Racer uses the radio,
motor/gearbox and prop from a Park Zone Bind’n’Fly model. Retro RC prefers the
motor/gearbox from the Sukhoi or Pole Cat, but you can use whatever you have.
The camp e’Racer takes only 2–4 hours to build. And painting it
takes no time at all; it’s already done for you! You provide the radio, motor/gearbox/prop, a battery, and glue; everything else needed is in the kit: 40 precision laser-cut parts of quality balsa, basswood and aircraft plywood, all hardware, carbon pushrods, printed paper covering, pilot with scarf, and step-by-step photo instructions.
Current color schemes available: red and white; red and yellow; blue and white; blue and yellow; orange and blue; navy and orange; green and cream; or white and white (for you to customize). If there are enough requests for a different color scheme, Retro RC will be happy to add it to the line-up. SPECIFICATIONS: wing span, 151⁄2 inches; wing area, 42 square inches; flying weight, 37–46 grams; wing loading, 4.5–5.5 ounces/square foot. Requires: 3 channels, using Spektrum “brick”, Park Zone Bind’n’Fly motor/gearbox/prop, 160 mAh Li-Po The camp e’Racer sells for $24.99 plus shipping/handling.
RETRO RC LLC, PO Box 193, Keego Harbor, MI 48320 248-212-9666;
www.RetroRC.US.com
Toni’s Covering Iron Sock
Treat your covering iron and covering to tender loving care with Toni’s Covering Iron Sock. The Sock is made with double layer T shirt material and supports a large cord draw string making it easy to tie on your iron. To install on your iron simply lay your iron in the middle of the sock, pull the draw strings over the handle and tie a bow. You are ready to cover. You will have to increase the temperature of the iron, normally used, because of the sock. The price is $5.00, postage included. For more information write, call or e- mail at the address below.
TONI SMITH, 2416 Carina Terrace, Acworth, GA 30101, 770-917-4928,
antoneittasmith@gmail.com
FLYING MODELS LASER CUT RUBBER POWERED BALSA KIT
20” WINGSPAN
Model built by Bob Bojanowski
AERONCA 1939 CHIEF
$19.95 + $8 S/H
LASERCALTM TISSUECALTM
WING REGISTRATION MARKINGS TAIL MARKINGS
1:22 SCALE MODEL.FEATURE MODEL FOR FLYING ACES CLUB FAC NATS MK XVIII AERONCA CHIEF ONE DESIGN EVENT IN JULY 2012. CAPABLE OF GREAT FLIGHTS!
LASER CUT BALSA PARTS, E-B PROPELLER EBM THRUST BUTTON, FAI RUBBER
Ck/money order in US dollars. Shipping price good in USA & Canada. 48 page color catalog $2. Tel: 334-358-5184
PO Box 681744 Prattville, AL 36068-1744
WWW.EASYBUILTMODELS.COM 7
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68