First thing you see on power up is the Main Screen (above left). When the trims hit exact center on the bars there is a more noticeable beep. Here are just some of the preset options (above right) that can be selected for the Preflight


Screen. Customized inputs are also possible. Channels can be reassigned two ways, either through the Tx Channel Input (below left) or the Rx Port Assignments (below right). Tx sticks can also be configured in Modes 1–4.


In the Setup page for the Sequencer (above left), time, switch and channel assignments are input. Note that Chan A is a step function while Chan B is proportional. The next page (above right), the monitor, shows the graphic


difference between the two with A as a vertical line, and B as a slope. Absolute Travel (below left) is the final arbiter of travel adjustment in cases of complex mixes. The Analog Switch Setup (below right) configures kick points for mixes.


FLYING MODELS


53


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68