Modeling municipal waste trains, Part I: a transfer facility
Combining roof sections (above left) re- quires patch plates like these at the joints. Long structures need interior bracing to keep them square and prevent roof sag, Note the simple overlaps on the two-piece braces (above right). The bottom piece is placed between the walls, then the smaller ones are pushed up against the roof and glued to the cross bracing. The only critical measurement is for the cross pieces. The texture from details and multiple-color paint schemes will help make a model look larger.
together in the center using the roof bracing included with the kits, forming a one-piece roof.
Now the roof can be placed onto the
structure. Almost immediately the two issues associated with long structures become evident: the sides will bow out- ward ever slightly while the roof dips toward the center. Both issues are easi- ly corrected using more braces placed within the structure. The first series of
60
MAY 2012
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100