11-04 :: April/May 2011
nanotimes News in Brief
53
Battery Material // Technology Based on Iron-Carbon – For Accumulators of Much Higher Energy Density
Development of high-performance energy stores pre- sently is one of the biggest challenges of research, as they are the prerequisite for the economic efficiency of future electromobility and for the integration of renewable energies in the energy system. As regards batteries, it is worked on increasing the performance, sustainability, and safety. At the Institute of Nano- technology of Karlsruhe Institute of Technology (KIT), a completely novel approach to battery ar- chitecture and use of materials has now been deve- loped, which promises enormous improvements in terms of the amount of energy stored and costs. This new approach might considerably increase the cruis- ing range of electric cars in the long term.
According to the state of the art, the amount of energy stored in a battery is smaller by a factor of 50 than the energy in a fuel tank of the same size. “Use of conventional lithium-ion battery materials is expected to allow for slight improvements only,” says Dr. Maximilian Fichtner, Head of the Energy Storage Group of the KIT Institute of Nanotechno- logy. To considerably enhance the performance, it was therefore necessary to develop completely new approaches to both the development of materials and battery architecture.
Fichtner and his team focused on entirely new iron- carbon materials, by means of which far more energy can be stored on smallest space. The problem: The
materials described so far do not have any cyclic stability and storage capacity decreases rapidly, if the battery is charged and discharged repeatedly.
The KIT Institute of Nanotechnology has therefore developed a new approach to the synthesis of iron- carbon storage materials. By means of the process, the patent of which has been applied for, metal organic materials are mixed with a lithium salt and heated up. As a result, an entirely new nanostruc- ture with simultaneously developing carbon wires forms. Nanoscaled storage units and conduction paths are generated quasi in one step.
The specific capacity of the new cathode material, i.e. its capability of storing energy, already is about twice that of current batteries. “This is the first exa- mple worldwide of a stable conversion material, by means of which far more electrons and lithium can be “packed” on small space than by conventional methods,” underlines Fichtner. ”Production is simple and inexpensive and the high capacity of the iron- carbon electrode is maintained for a long time. This is an enor-mous progress compared to materials used so far. If we succeed in fully exhausting the potenti- al of this new material, we can improve the storage density of lithium-ion batteries by the factor of 5,” says Fichtner.
http://www.kit.edu
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93