Precision submounts for laser diodes and photodiodes
laser and diodes Yellow and orange Dpss options
Oxxius has released the LaserBoxx LBX-559, a yellow DPSS laser module operating at 559nm, and the LaserBoxx LBX-588, an orange version at 588nm. Based on a next-generation monolithic resonator, the lasers meet the cost and footprint of laser diode modules. Both have an industry standard package of only 100 x 40 x 40mm, simplifying integration into existing instruments. available at powers of 30 and 50mW in a TEm00
circular beam, both lasers feature outstanding power stability (‹0.5 per cent over eight hours), low noise (‹0.5 per cent rms from 10Hz to 20mHz) and power consumption as low as 20W. The LaserBoxx is built on a highly stable
mechanical frame to ensure excellent beam pointing stability and subsequent long-term output power stability for single-mode fibre delivery. The LBX-559 is the ideal source for
Exceptional features
Tight tolerance controlled surface finish and flatness Optional super-sharp edges
Precision coatings with superior adhesion Optional wrap over metallizations
Pre-deposited AuSn with excellent re-flow properties Standard or bespoke outlines
Product types
Precision metal submounts including C-, Q- and W-mounts
Laser bar submounts in tungsten/copper (WCu)
Aluminium nitride (AlN) patterned carriers Ceramic photodiode mounts
23 - 26 May 2011 Visit us in Hall B1, Stand 621
If you demand precision, contact us today
Tel: +44 (0)1823 286698 Email:
info@lewtec.co.uk
www.lewtec.co.uk 52 ElEctro optics l may 2011 Fibre-coupled laser diode
Frankfurt Laser Company has introduced its new FBLD-9XX-50.00-2Pin, a fibre-coupled laser diode designed for pumping ytterbium (yb) fibre amplifiers and ytterbium fibre lasers. The diode outputs 50W of power into a 105µm diameter fibre, with numerical aperture of 0.15 or 0.22. Near-IR wavelengths at 915, 940 and 976nm are
Dpss laser for demanding applications
Cobolt has introduced a new wavelength on its single-frequency 05-01 platform released in 2009. The new higher power series of the Cobolt Jive operates at 561nm with up to 300mW CW output power – well suited to demanding applications such as advanced flow cytometry and super-resolution microscopy. The Cobolt Jive 05-01 is a continuous-
wave single-frequency DPSS laser operating at 561nm in a perfect quality TEm00 beam (m2
‹1.1). It is available with up to 300mW
output power on the single-frequency 05-01 Series platform. a new proprietary cavity design provides ultra-low noise performance of typically ‹0.1per cent rms (over 20Hz- 20mHz and over 10-40°C) and a narrow spectral linewidth of ‹1mHz as well as being immune to optical feedback. Lower powers (25-150mW) are available on the 04-01 Series platform. The laser is manufactured using Cobolt’s
proprietary HTCure technology in a compact and hermetically-sealed package, which provides a very high level of immunity to varying environmental conditions and exceptional reliability.
www.cobolt.se
applications such as flow cytometry or confocal microscopy, notably for excitation of PE or fruit proteins. Its 559nm wavelength fits perfectly the commercial filter sets available for these fluorophores. For higher-power requirements, Oxxius offers its SLIm-561 up to 300mW. The LBX-588 is suitable for fluorescence
excitation of alexa Fluor 594, Texas Red or mCherr and its 588nm wavelength fits perfectly the commercial filter sets available for these fluorophores.
www.oxxius.com
High-power plDs at 905 and 1,550nm
Laser Components has introduced a new range of high- power pulsed laser diodes (PLDs), produced at its Canadian facility. Single emitters, multi-junction PLDs, and stacked designs are available at 905 and 1,550nm. The diodes can be used in applications such as rangefinding, speed measurement, laser radar, security scanners, in laser curtains, or testing and measurement systems. The alGaas structure of the 905 series offers
high reliability, good beam properties, and temperature stability. at an efficiency of 1W/a, the stacked designs achieve a peak power of 120W at a pulse length of 150ns. multi-junction PLDs achieve a peak power of more than 220W. The 1,550nm PLDs are well suited for the
production of eye-safe laser rangefinders. They are available as single elements, multi-junction PLDs, and stacks with a peak power of up to 50W. The pulsed laser diodes are delivered either
housed or un-housed, with TO18, 5.6mm, 9mm, and 8-32 coax housings available alongside chips on ceramic sub-mounts. Customer-specified designs and other
wavelengths are available upon request.
www.lasercomponents.com
available. This diode provides high efficiency, brightness, stability and excellent beam quality, and is designed for use in harsh environments, such as those found in defence, industrial and telecommunication applications. The company provides full serial number traceability and provides a testing certificate with each unit.
www.frlaserco.com
www.electrooptics.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64