With Createx Auto Borne white I loosely map the light ar- eas. Then I lift up the inside cut out like a flap and insert a clean cutting mat under it. Cut out the eyes and mouth, replace the flap, and shoot some thin white to map their position (Steps 3 to 5). Lift up the flap and start laying down colors. A lot of the colors I will use here are Daler-Rowney

(F.W.) inks. They flow very well through and airbrush and can be thinned with water or several other acrylic paint re- ducers. They also give very high coverage. Using FW flesh tint I loosely paint the light areas of the face. I then add a couple of drops of FW flame red to that mix and start fading the darker areas into the light ones (Steps 6 & 7). Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32