Here you see the red area masked off and I used 1/8 tape to create many of the dials and display lights. I then sprayed the blue to create the base for the next step. This dark base will help to create the fire effect.

To render the flames, I will build up the flame effect using white. Next I spray over the white with transparent yellow, and then adding red. I like to work the colors gradually and will then go back and add white highlights.

To render the chrome saber-tooth lion, I start by slowly building up a grey to start building detail. Next I work up the design with blue and then black to create depth. I will cut out acetate to use as template to create a few hard lines but most will be freehand. When rendering the eye I started with a freehand spray of the eye. I will later come in and put details around the eye.

www.airbrushtechniquemagazine.com Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32